EUVIMEDEUVIMED entdecken
Crossref

The Elastic Stiffness C 13 in Transversely Isotropic Shales

Colin M. Sayers

Geophysical Prospecting · 2026-11 · 74 (9)

DOI: 10.1111/1365-2478.70286 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Geophysical Prospecting, online erschienen am 13.11.2026. Verfasst von Colin M. Sayers. Die Arbeit nennt 51 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Shales are often anisotropic due to fine‐scale layering and preferred alignment of clay particles with bedding. They may be approximated as transversely isotropic (TI) media with symmetry axis ( x 3 ) perpendicular to bedding. TI media have five independent elastic stiffnesses C 11 , C 33 , C 55 , C 66 and C 13 , with C 12 = C 11 –2 C 66 . Although C 11 , C 33 , C 55 and C 66 may be estimated from velocities measured parallel and perpendicular to x 3 , C 13 requires measurements at oblique angles, resulting in greater uncertainty. Despite this, C 13 is important in seismic velocity analysis, imaging, amplitude variation with offset (AVO) and geomechanical applications, including wellbore stability, stress estimation, hydraulic fracture design and reservoir compaction. For situations in which measurements of C 13 are unavailable or considered unreliable, several studies have sought to constrain its possible range in terms of the other elastic stiffness coefficients. In isotropic media and , but shale microstructure may break these equalities due to preferred orientation of clay particles, fine‐scale layering and bedding‐parallel microcracks. For a TI orientation distribution (ODF) of clay particles, the elastic properties may be characterized by two coefficients, W 200 and W 400 , in an expansion of the ODF in generalized Legendre functions. C 13 may be greater than C 12 if W 200 is significantly larger than W 400 , whereas C 13 may be lower than if W 200 is significantly smaller than W 400 . Fine‐scale layering also influences C 13 . Depending on layer properties, sequences with may occur. Bedding‐parallel microcracks typically increase C 12 – C 13 and C 13 – C 33 + 2 C 55 , but C 13 – C 33 + 2 C 55 may decrease if the ratio of normal‐to‐shear crack compliance is small, as expected for isolated fluid‐filled cracks. These observations provide insight into the physical controls on C 13 and improve understanding of its variability in shale formations.

Zitieren

APA

Sayers, C. M. (2026). The Elastic Stiffness C 13 in Transversely Isotropic Shales. Geophysical Prospecting, 74(9). https://doi.org/10.1111/1365-2478.70286

Vancouver

Sayers CM. The Elastic Stiffness C 13 in Transversely Isotropic Shales. Geophysical Prospecting. 2026;74(9). doi:10.1111/1365-2478.70286

BibTeX
@article{Sayers2026,
  author = {Sayers, Colin M.},
  title = {The Elastic Stiffness C 13 in Transversely Isotropic Shales},
  journal = {Geophysical Prospecting},
  year = {2026},
  volume = {74},
  number = {9},
  doi = {10.1111/1365-2478.70286}
}
Kostenlos starten →