Multi-Hop RIS ISAC for Target Positioning: A Tensor Decomposition-Based Approach
IEEE Transactions on Wireless Communications · 2026 · 25 · 21545-21561
DOI: 10.1109/twc.2026.3721246 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Wireless Communications, 2026. Verfasst von Yirui Luo und 4 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Gefördert von: National Research Foundation, Singapore, and Infocomm Media Development Authority through the Future Communications Research and Development Programme.
Abstract (Originalsprache)
Reconfigurable intelligent surface (RIS) has demonstrated remarkable potential to enhance the performance of integrated sensing and communication (ISAC), particularly when the line-of-sight (LoS) paths are obstructed. By controlling the reconfigurable elements on the surface, RIS can establish virtual LoS paths and provide considerable passive beamforming gains, thereby significantly improving the received signal quality. In this paper, we design a novel multi-hop RIS ISAC system for target positioning, where multiple RISs are deployed to assist the communication from a transmitter to associated users while simultaneously enhancing receiver sensing performance in target positioning. Specifically, we formulate an optimization problem to minimize the root mean square error (RMSE) of the target detection while guaranteeing the communication requirements of the users. To solve this problem, we first unfold the cascaded sensing channel through parallel factor decomposition, and develop a low-rank CANDECOMP/PARAFAC decomposition (CPD)-based scheme to extract the location parameters (i.e., angle of arrival, angle of departure and delay) of the sensing targets. Then, we develop a scheme for jointly selecting the transmit beamforming and RIS phase shift configurations to maximize the sensing energy at the receiver, which in turn leads to improved accuracy in target positioning. We also provide a uniqueness analysis, complexity analysis, and Cramér-Rao lower bound (CRLB) of the parameters estimated by our methodology. Simulation results validate the improvement in target positioning obtained by our design relative to baselines.
Förderung
- National Research Foundation, Singapore, and Infocomm Media Development Authority through the Future Communications Research and Development Programme
Zitieren
APA
Luo, Y., Ma, X., Guan, Y. L., Brinton, C. G., & Yuen, C. (2026). Multi-Hop RIS ISAC for Target Positioning: A Tensor Decomposition-Based Approach. IEEE Transactions on Wireless Communications, 25, 21545-21561. https://doi.org/10.1109/twc.2026.3721246
Vancouver
Luo Y, Ma X, Guan YL, Brinton CG, Yuen C. Multi-Hop RIS ISAC for Target Positioning: A Tensor Decomposition-Based Approach. IEEE Transactions on Wireless Communications. 2026;25:21545-21561. doi:10.1109/twc.2026.3721246
BibTeX
@article{Luo2026,
author = {Luo, Yirui and Ma, Xiaoyan and Guan, Yong Liang and Brinton, Christopher G. and Yuen, Chau},
title = {Multi-Hop RIS ISAC for Target Positioning: A Tensor Decomposition-Based Approach},
journal = {IEEE Transactions on Wireless Communications},
year = {2026},
volume = {25},
pages = {21545--21561},
doi = {10.1109/twc.2026.3721246}
}
EUVIMED