Flexible Intelligent Metasurfaces for Downlink Multiuser MISO Communications
IEEE Transactions on Wireless Communications · 2025-04 · 24 (4) · 2940-2955
DOI: 10.1109/twc.2025.3526843 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Wireless Communications, 2025-04. Verfasst von Jiancheng An und 5 weiteren Autor:innen. Die Arbeit wurde bisher 79-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: Ministry of Education (MOE), Singapore, under its MOE Tier 2, National Research Foundation Singapore, Infocomm Media Development Authority under its Future Communications Research and Development Programme.
Abstract (Originalsprache)
Flexible intelligent metasurface (FIM) technology shows promise in terms of enhancing both the spectral and energy efficiency of wireless networks. An FIM is composed of an array of low-cost radiating elements, each of which can independently radiate electromagnetic signals, while flexibly adjusting its position along the direction perpendicular to the surface by a process termed as “morphing”. This is of particular interest for wireless communication systems operating at millimeter-wave and terahertz frequencies, where deep fading generally occurs within a few millimeters. Hence, in contrast to conventional rigid 2D antenna arrays, the FIM surface shape may be reconfigured to improve the channel quality by beneficial 3D morphing. In this paper, we investigate the multiuser downlink, where an FIM deployed at a base station (BS) communicates with multiple single-antenna users. We formulate an optimization problem for minimizing the total downlink transmit power at the BS, by jointly optimizing the transmit beamforming and FIM surface shape, subject to an individual signal-to-interference-plus-noise ratio (SINR) constraint of each user as well as a constraint on the maximum FIM morphing range. To solve this problem, we first consider a simple single-user scenario and show that the optimal 3D surface shape is achieved by independently adjusting each FIM element to the position having the strongest channel gain. However, in realistic multiuser scenarios, FIM surface-shape morphing involves complex tradeoffs. To address this issue, an efficient alternating optimization method is proposed to iteratively update the FIM surface shape and the transmit beamformer to gradually reduce the transmit power. Additionally, we analyze the performance gain of the FIM, showcasing a logarithmic received power scaling law versus its maximum morphing range. Finally, simulation results show that the FIM reduces the transmit power by about 3 dB compared to conventional rigid 2D arrays at a given data rate. The code for this paper is available at https://github.com/JianchengAn.
Förderung
- Ministry of Education (MOE), Singapore, under its MOE Tier 2
- National Research Foundation Singapore
- Infocomm Media Development Authority under its Future Communications Research and Development Programme
- European Union through the Horizon Europe Project COVER
- Horizon Europe Project UNITE
- Horizon Europe Project INSTINCT
- Horizon Europe project TWIN6G
- Agence Nationale de la Recherche (ANR) through the France 2030 Project ANR-PEPR Networks of the Future
Zitieren
APA
An, J., Yuen, C., Renzo, M. D., Debbah, M., Poor, H. V., & Hanzo, L. (2025). Flexible Intelligent Metasurfaces for Downlink Multiuser MISO Communications. IEEE Transactions on Wireless Communications, 24(4), 2940-2955. https://doi.org/10.1109/twc.2025.3526843
Vancouver
An J, Yuen C, Renzo MD, Debbah M, Poor HV, Hanzo L. Flexible Intelligent Metasurfaces for Downlink Multiuser MISO Communications. IEEE Transactions on Wireless Communications. 2025;24(4):2940-2955. doi:10.1109/twc.2025.3526843
BibTeX
@article{An2025,
author = {An, Jiancheng and Yuen, Chau and Renzo, Marco Di and Debbah, Mérouane and Poor, H. Vincent and Hanzo, Lajos},
title = {Flexible Intelligent Metasurfaces for Downlink Multiuser MISO Communications},
journal = {IEEE Transactions on Wireless Communications},
year = {2025},
volume = {24},
number = {4},
pages = {2940--2955},
doi = {10.1109/twc.2025.3526843}
}
EUVIMED