EUVIMEDEUVIMED entdecken
Crossref

Toward mmWave Surface Acoustic Wave Resonators in Lithium Niobate on Silicon Carbide

Tzu-Hsuan Hsu, Lezli Matto, Joshua Campbell, Jack Kramer, Zhi-Qiang Lee, Ian Anderson, Kaicheung Chow, Mark S Goorsky, Ming-Huang Li, Ruochen Lu

IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control · 2025-11 · 72 (11) · 1522-1532

DOI: 10.1109/tuffc.2025.3611298 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2025-11. Verfasst von Tzu-Hsuan Hsu und 9 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: Defense Advanced Research Projects Agency (DARPA) Compact Front-end Filters at the Element-level (COFFEE) Program, National Science Foundation (NSF) Faculty Early Career Development Program (CAREER): Radio Frequency Piezoelectric Acoustic Microsystems for Efficient and Adap…, National Science and Technology Council (NSTC) of Taiwan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recent advancements in next-generation wireless systems have expanded the need for radio frequency front-ends (RFFEs) toward the millimeter-wave (mmWave) range. This work introduces two methods targeting the efficient design of solidly mounted surface acoustic wave (SAW) resonator architectures based on lithium niobate on silicon carbide (LN-on-SiC) heteroacoustic waveguides for mmWave applications. The first method uses a longitudinal SAW (L-SAW) mode in X-cut LN to achieve a high phase velocity of 6500 m/s and a figure of merit (FoM) of 6.53 at 22.42 GHz, enabled by strong acoustic confinement and careful wavelength scaling. The second method presents a novel electrode-guided shear horizontal SAW (EG SH-SAW) mode in Y-cut LN, leveraging electrode design to confine higher order SH modes and mitigate internal stress cancellation. The fabricated EG SH-SAW resonator achieves operation at 23.5 GHz with a coupling coefficient k2 of 1.6% and an FoM of 4.16. Both methods demonstrate resonators successfully scaled toward mmWave range with high Q-factors and open the potential for future solidly mounted frequency-scalable, high-performance acoustic devices in mmWave bands.

Förderung

  • Defense Advanced Research Projects Agency (DARPA) Compact Front-end Filters at the Element-level (COFFEE) Program
  • National Science Foundation (NSF) Faculty Early Career Development Program (CAREER): Radio Frequency Piezoelectric Acoustic Microsystems for Efficient and Adap…
  • National Science and Technology Council (NSTC) of Taiwan

Zitieren

APA

Hsu, T. H., Matto, L., Campbell, J., Kramer, J., Lee, Z. Q., Anderson, I., Chow, K., Goorsky, M. S., Li, M. H., & Lu, R. (2025). Toward mmWave Surface Acoustic Wave Resonators in Lithium Niobate on Silicon Carbide. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 72(11), 1522-1532. https://doi.org/10.1109/tuffc.2025.3611298

Vancouver

Hsu TH, Matto L, Campbell J, Kramer J, Lee ZQ, Anderson I, et al. Toward mmWave Surface Acoustic Wave Resonators in Lithium Niobate on Silicon Carbide. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. 2025;72(11):1522-1532. doi:10.1109/tuffc.2025.3611298

BibTeX
@article{Hsu2025,
  author = {Hsu, Tzu-Hsuan and Matto, Lezli and Campbell, Joshua and Kramer, Jack and Lee, Zhi-Qiang and Anderson, Ian and Chow, Kaicheung and Goorsky, Mark S and Li, Ming-Huang and Lu, Ruochen},
  title = {Toward mmWave Surface Acoustic Wave Resonators in Lithium Niobate on Silicon Carbide},
  journal = {IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control},
  year = {2025},
  volume = {72},
  number = {11},
  pages = {1522--1532},
  doi = {10.1109/tuffc.2025.3611298}
}
Kostenlos starten →