EUVIMEDEUVIMED entdecken
Crossref

Fire-Safe Lithium-Ion Batteries With Forced Immersion Cooling for Electric Vehicles and Next-Generation Energy Systems

Abdul Wahab, Tim Wieder, Nima Amjady, Hans Kemper, Hamid Khayyam

IEEE Transactions on Transportation Electrification · 2026-08 · 12 (4) · 6017-6031

DOI: 10.1109/tte.2026.3686102 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2026-08. Verfasst von Abdul Wahab und 4 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Gefördert von: RMIT European Doctoral Innovators (REDI) Program, through the European Union’s Horizon 2020 Research and Innovation Program under Marie Skłodowska-Curie.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal runaway remains a primary safety constraint for lithium-ion batteries (LIBs) in electrified transport, and existing mitigation strategies have not consistently eliminated flaming under severe abuse. This study quantifies forced-flow immersion cooling with DF7-dielectric fluid as a single-phase suppression approach during thermally triggered runaway conditions and provides design guidance through coordinated experiments and modeling. At 100% state of charge (SOC), immersion cooling effectively limited escalation: no flame or visible smoke was observed, average cell temperature peaked at $188.98~^{\circ }$ C, and coolant outlet temperature remained at $48.42~^{\circ }$ C despite a 12.379 kJ event energy. This indicates that forced convection and continuous renewal of subcooled fluid at the can surface maintained the heat-removal rate above the heat release during the transient and capped temperature excursion. An inverse energy-balance identification yielded an effective convective coefficient of 1205.62 W $\cdot $ m ${}^{-2}\cdot $ K −1 . Validated COMSOL model reproduces measured rise-peak-cooldown temperature profile and maps heat-transfer coefficient over flow-rates of 2–10 liters-per-minute and inlet temperatures of $15~^{\circ }$ C– $35~^{\circ }$ C, showing monotonic increases with both flow rate and inlet temperature. Vent-region confinement further enhances local convection, resulting in 30.17% reduction in peak temperature. Overall, forced-flow immersion cooling provides an actively tunable cooling boundary that improves thermal runaway resilience in electric vehicles and storage applications under tested thermal-abuse conditions.

Förderung

  • RMIT European Doctoral Innovators (REDI) Program, through the European Union’s Horizon 2020 Research and Innovation Program under Marie Skłodowska-Curie

Zitieren

APA

Wahab, A., Wieder, T., Amjady, N., Kemper, H., & Khayyam, H. (2026). Fire-Safe Lithium-Ion Batteries With Forced Immersion Cooling for Electric Vehicles and Next-Generation Energy Systems. IEEE Transactions on Transportation Electrification, 12(4), 6017-6031. https://doi.org/10.1109/tte.2026.3686102

Vancouver

Wahab A, Wieder T, Amjady N, Kemper H, Khayyam H. Fire-Safe Lithium-Ion Batteries With Forced Immersion Cooling for Electric Vehicles and Next-Generation Energy Systems. IEEE Transactions on Transportation Electrification. 2026;12(4):6017-6031. doi:10.1109/tte.2026.3686102

BibTeX
@article{Wahab2026,
  author = {Wahab, Abdul and Wieder, Tim and Amjady, Nima and Kemper, Hans and Khayyam, Hamid},
  title = {Fire-Safe Lithium-Ion Batteries With Forced Immersion Cooling for Electric Vehicles and Next-Generation Energy Systems},
  journal = {IEEE Transactions on Transportation Electrification},
  year = {2026},
  volume = {12},
  number = {4},
  pages = {6017--6031},
  doi = {10.1109/tte.2026.3686102}
}
Kostenlos starten →