An Integrated Boost Multilevel Converter With Asymmetrical Digitized Modulation Scheme for an Inductive Power Transfer Application
IEEE Transactions on Transportation Electrification · 2026-08 · 12 (4) · 6676-6686
DOI: 10.1109/tte.2026.3675254 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2026-08. Verfasst von Bharat Vardani und 2 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: New Zealand Ministry of Business, Innovation, and Employment Endeavor Fund.
Abstract (Originalsprache)
The misalignment between the primary and secondary coils of an inductive power transfer (IPT) system used to charge electric vehicles (EVs) reduces the charging efficiency as well as the charging power. This issue is compounded by the fluctuations in battery voltage, posing challenges in designing the power converters for an IPT-based EV charger that efficiently handles varying load conditions. Typically, this challenge is addressed by using expensive silicon carbide (SiC) MOSFETs with preregulation and secondary-side control or employing complex control and compensation strategies. Recently, an integrated boost multilevel converter (IBMC) topology utilizing low-voltage silicon (Si) MOSFETs has been proposed as a solution. However, its requirement for 12 submodules (SMs) can increase system costs. Furthermore, to overcome the limited number of useful states, the power factor correction (PFC) circuit had to support the IBMC by varying the DC-link voltage. This article improves upon the IBMC topology by introducing a new configuration that integrates both Si and SiC MOSFETs to reduce the switch count, thereby reducing the system costs and losses. Additionally, this work proposed the asymmetrical digitized modulation scheme employed in the proposed IBMC configuration to increase the number of useful states while minimizing the number of SMs, enabling efficient operation over a wide load range.
Förderung
- New Zealand Ministry of Business, Innovation, and Employment Endeavor Fund
Zitieren
APA
Vardani, B., Thrimawithana, D. J., & Covic, G. A. (2026). An Integrated Boost Multilevel Converter With Asymmetrical Digitized Modulation Scheme for an Inductive Power Transfer Application. IEEE Transactions on Transportation Electrification, 12(4), 6676-6686. https://doi.org/10.1109/tte.2026.3675254
Vancouver
Vardani B, Thrimawithana DJ, Covic GA. An Integrated Boost Multilevel Converter With Asymmetrical Digitized Modulation Scheme for an Inductive Power Transfer Application. IEEE Transactions on Transportation Electrification. 2026;12(4):6676-6686. doi:10.1109/tte.2026.3675254
BibTeX
@article{Vardani2026,
author = {Vardani, Bharat and Thrimawithana, Duleepa J. and Covic, Grant A.},
title = {An Integrated Boost Multilevel Converter With Asymmetrical Digitized Modulation Scheme for an Inductive Power Transfer Application},
journal = {IEEE Transactions on Transportation Electrification},
year = {2026},
volume = {12},
number = {4},
pages = {6676--6686},
doi = {10.1109/tte.2026.3675254}
}
EUVIMED