Single Lookup Table Creation Method for Copper-Loss Minimization in a Wound-Field Synchronous Motor
IEEE Transactions on Transportation Electrification · 2025-12 · 11 (6) · 13404-13415
DOI: 10.1109/tte.2025.3601361 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2025-12. Verfasst von Joon-Seok Kim und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: Korea Agency for Infrastructure Technology Advancement (KAIA) through the Ministry of Land, Infrastructure and Transport.
Abstract (Originalsprache)
Wound-field synchronous motors (WFSMs) allow control of the field current, resulting in numerous combinations of stator d–q axis current and field current capable of producing the same torque. In addition, changes in the d–q axis current and field current cause nonlinear variations in the inductance. This article proposes a method to control a WFSM using a current combination that outputs maximum torque with minimum copper losses while considering variations in the inductance. The proposed method controls the WFSM by creating a single lookup table (LUT) through experimentation, accounting for inductance variations due to changes in current while also reducing memory occupancy. In addition, since the LUT is created with current combinations that minimize copper losses, WFSM can be controlled with minimum copper losses. This article describes the method and sequence for creating the proposed single flux-torque LUT and verifies the proposed method through experimental results.
Förderung
- Korea Agency for Infrastructure Technology Advancement (KAIA) through the Ministry of Land, Infrastructure and Transport
Zitieren
APA
Kim, J., Ryu, J., Kim, D., & Lee, J. (2025). Single Lookup Table Creation Method for Copper-Loss Minimization in a Wound-Field Synchronous Motor. IEEE Transactions on Transportation Electrification, 11(6), 13404-13415. https://doi.org/10.1109/tte.2025.3601361
Vancouver
Kim J, Ryu J, Kim D, Lee J. Single Lookup Table Creation Method for Copper-Loss Minimization in a Wound-Field Synchronous Motor. IEEE Transactions on Transportation Electrification. 2025;11(6):13404-13415. doi:10.1109/tte.2025.3601361
BibTeX
@article{Kim2025,
author = {Kim, Joon-Seok and Ryu, Joon-Hyoung and Kim, Do-Hyeon and Lee, June-Seok},
title = {Single Lookup Table Creation Method for Copper-Loss Minimization in a Wound-Field Synchronous Motor},
journal = {IEEE Transactions on Transportation Electrification},
year = {2025},
volume = {11},
number = {6},
pages = {13404--13415},
doi = {10.1109/tte.2025.3601361}
}
EUVIMED