EUVIMEDEUVIMED entdecken
Crossref

Influence of the Wheel Rim Size on Different In-Wheel Motor Topologies

Kehan Yan, Ben Zhang, Zunyan Hu, Jianqiu Li, Liangfei Xu, Minggao Ouyang

IEEE Transactions on Transportation Electrification · 2025-08 · 11 (4) · 8663-8676

DOI: 10.1109/tte.2025.3560982 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2025-08. Verfasst von Kehan Yan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Young Elite Scientists Sponsorship Program by China Association for Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A comparison of in-wheel motors (IWMs) across different vehicle classes is difficult owing to considerable variations in size, power constraints, and the characteristics of IWM topologies. To address these issues, an objective comparison methodology for IWMs using the wheel rim as a mediator is proposed. First, the configurations of four typical IWM topologies with cooling systems are defined. Then, by analyzing the relation between wheel rim, tire, and vehicle, the standard wheel rim size is recognized as an important constraint for comparison. Moreover, four IWM topologies are optimized regarding torque volume density and duty-cycle efficiency across different rim sizes for the selection of representative designs. Finally, the Pareto front designs of each topology and rim size are discussed electromagnetically and thermally via validated finite-element analysis (FEA). Results show that the wheel rim size considerably impacted the performance of IWMs. Energy consumption reduction is crucial for IWMs application in vehicles with rims up to 16 in. For 18-in rim vehicles, the double-rotor integral slot motor exceeds vehicle torque requirements along with energy consumption benefits, enabling further drivetrain configuration innovation. The 20-in rims eliminate the difficulty of reducer installation, which enhances torque density for inner rotor fractional-slot motors.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Young Elite Scientists Sponsorship Program by China Association for Science and Technology

Zitieren

APA

Yan, K., Zhang, B., Hu, Z., Li, J., Xu, L., & Ouyang, M. (2025). Influence of the Wheel Rim Size on Different In-Wheel Motor Topologies. IEEE Transactions on Transportation Electrification, 11(4), 8663-8676. https://doi.org/10.1109/tte.2025.3560982

Vancouver

Yan K, Zhang B, Hu Z, Li J, Xu L, Ouyang M. Influence of the Wheel Rim Size on Different In-Wheel Motor Topologies. IEEE Transactions on Transportation Electrification. 2025;11(4):8663-8676. doi:10.1109/tte.2025.3560982

BibTeX
@article{Yan2025,
  author = {Yan, Kehan and Zhang, Ben and Hu, Zunyan and Li, Jianqiu and Xu, Liangfei and Ouyang, Minggao},
  title = {Influence of the Wheel Rim Size on Different In-Wheel Motor Topologies},
  journal = {IEEE Transactions on Transportation Electrification},
  year = {2025},
  volume = {11},
  number = {4},
  pages = {8663--8676},
  doi = {10.1109/tte.2025.3560982}
}
Kostenlos starten →