EUVIMEDEUVIMED entdecken
Crossref

Electric Motor Thermal Management Using 3D-Printed Hollow Liner

Amitav Tikadar, Md. Jubayer Hossain, Satish Kumar

IEEE Transactions on Transportation Electrification · 2025-06 · 11 (3) · 8318-8326

DOI: 10.1109/tte.2025.3539631 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2025-06. Verfasst von Amitav Tikadar und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 22 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this article, a novel in-slot cooling concept using 3D-printable hollow liners (HLs) has been introduced. Using a 25-kW motor topology as a base case, 3D-printable HLs with lofted inlets and outlets were designed. Inline circular pin-fins were incorporated inside the HLs to enhance the convection heat transfer area and mechanical strength. Coupled electrothermal analyses were performed to investigate the effect of wall thickness and materials used for the HLs. The numerical results show that 1.5-mm-thick ceramic HLs can significantly reduce motor temperature by reducing the thermal resistance between the winding and the coolant and can sustain 47% more current before reaching the winding insulation’s temperature limit, compared to conventional jacket cooling (JC). The designed HLs were 3D-printed using a ceramic-like high-temperature material, and a 3-kW dc motorette testbed was developed to demonstrate the applicability of the cooling concept. The analysis of this motorette shows that HLs can maintain a transient current density of 27.95 A/mm2, within the temperature limit of class F insulation (155 °C).

Zitieren

APA

Tikadar, A., Hossain, M. J., & Kumar, S. (2025). Electric Motor Thermal Management Using 3D-Printed Hollow Liner. IEEE Transactions on Transportation Electrification, 11(3), 8318-8326. https://doi.org/10.1109/tte.2025.3539631

Vancouver

Tikadar A, Hossain MJ, Kumar S. Electric Motor Thermal Management Using 3D-Printed Hollow Liner. IEEE Transactions on Transportation Electrification. 2025;11(3):8318-8326. doi:10.1109/tte.2025.3539631

BibTeX
@article{Tikadar2025,
  author = {Tikadar, Amitav and Hossain, Md. Jubayer and Kumar, Satish},
  title = {Electric Motor Thermal Management Using 3D-Printed Hollow Liner},
  journal = {IEEE Transactions on Transportation Electrification},
  year = {2025},
  volume = {11},
  number = {3},
  pages = {8318--8326},
  doi = {10.1109/tte.2025.3539631}
}
Kostenlos starten →