Cooling System Design for High-Power-Density Permanent Magnet Synchronous Motor Based on Micro Heat Pipe Array
IEEE Transactions on Transportation Electrification · 2025-04 · 11 (2) · 6719-6730
DOI: 10.1109/tte.2024.3514882 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2025-04. Verfasst von Bo Ma und 6 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hunan, Open Foundation of National Key Laboratory of Multi-Perch Vehicle Driving Systems.
Abstract (Originalsprache)
High power-to-weight ratio and reliability are key priorities in the advanced design of permanent magnet synchronous motors (PMSMs). This article develops and characterizes an efficient cooling structure for PMSMs to achieve these goals by applying a novel micro heat pipe array (MHPA). The cooling structure with MHPA is arranged in motor slots with concentrated winding, creating an efficient cooling path directly contacting the winding and iron core. Stator modules are manufactured and tested to verify the effectiveness of the developed structure at the first stage. The impact of MHPA placement on electromagnetic and thermal performance is investigated. The superiority of the design with horizontally slot-bottom placed MHPA is demonstrated. Two prototypes of PMSMs with identical specifications and dimensions were built for testing: one equipped with the described cooling system and the other with conventional air cooling. Simulation and test results prove the effectiveness of the developed cooling structure on over 14 °C hotspot temperature reduction and 10% power density improvement.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Hunan
- Open Foundation of National Key Laboratory of Multi-Perch Vehicle Driving Systems
- Project of Key Products of Manufacturing Industry in Hunan Province
Zitieren
APA
Ma, B., Xing, J., Huang, S., Wang, K., Zhang, J., Lei, G., & Zhu, J. (2025). Cooling System Design for High-Power-Density Permanent Magnet Synchronous Motor Based on Micro Heat Pipe Array. IEEE Transactions on Transportation Electrification, 11(2), 6719-6730. https://doi.org/10.1109/tte.2024.3514882
Vancouver
Ma B, Xing J, Huang S, Wang K, Zhang J, Lei G, et al. Cooling System Design for High-Power-Density Permanent Magnet Synchronous Motor Based on Micro Heat Pipe Array. IEEE Transactions on Transportation Electrification. 2025;11(2):6719-6730. doi:10.1109/tte.2024.3514882
BibTeX
@article{Ma2025,
author = {Ma, Bo and Xing, Jinming and Huang, Sheng and Wang, Kun and Zhang, Ji and Lei, Gang and Zhu, Jianguo},
title = {Cooling System Design for High-Power-Density Permanent Magnet Synchronous Motor Based on Micro Heat Pipe Array},
journal = {IEEE Transactions on Transportation Electrification},
year = {2025},
volume = {11},
number = {2},
pages = {6719--6730},
doi = {10.1109/tte.2024.3514882}
}
EUVIMED