EUVIMEDEUVIMED entdecken
Crossref

An Experimentally Validated Electro-Thermal EV Battery Pack Model Incorporating Cycle-Life Aging and Cell-to-Cell Variations

Joseph N. E. Lucero, Vivek A. Sujan, Simona Onori

IEEE Transactions on Transportation Electrification · 2024-12 · 10 (4) · 8122-8136

DOI: 10.1109/tte.2024.3365028 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2024-12. Verfasst von Joseph N. E. Lucero und 2 weiteren Autor:innen. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Department of Energy Vehicle Technologies Office, Oak Ridge National Laboratory’s National Transportation Research Center, National Sciences and Engineering Research Council of Canada’s Postgraduate Scholarships—Doctoral Award.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium-ion batteries are used in a wide variety of applications. To meet the power and energy demands of these applications, battery packs are composed of hundreds to thousands of cells. The electrical and thermal interactions between cells introduce additional complexity in the pack dynamics. To capture these effects, a battery pack model composed of 192 cells based on a first-generation (2012) Nissan Leaf battery pack is developed in MATLAB/Simulink/Simscape. With this model, we simulate the electrical dynamics (using a first-order equivalent-circuit model), the thermal dynamics (using a first-order lumped-parameter thermal model), and the aging dynamics (using a semi-empirical severity factor-based model) of every cell in the pack and we also create a pack thermal model that explicitly captures the heat exchange between the modules, and the cells contained within, during operation. The models are calibrated and validated, both at the cell and pack level, with experimental data. Two different case studies of this pack model are investigated. In the first case study, an initial, normally distributed, cell-to-cell capacity variation is introduced and its effect on the pack voltage and module temperatures is studied. In the second case study, we deliberately insert cells with lower than nominal capacity into the pack and we investigate how this type of initial cell-to-cell capacity variation affects the pack’s ability to deliver energy over time. Finally, we also study how parallel-connected cells can reduce the effects of cell-to-cell variations at the expense of increased aging of the pack overall.

Förderung

  • Department of Energy Vehicle Technologies Office
  • Oak Ridge National Laboratory’s National Transportation Research Center
  • National Sciences and Engineering Research Council of Canada’s Postgraduate Scholarships—Doctoral Award

Zitieren

APA

Lucero, J. N. E., Sujan, V. A., & Onori, S. (2024). An Experimentally Validated Electro-Thermal EV Battery Pack Model Incorporating Cycle-Life Aging and Cell-to-Cell Variations. IEEE Transactions on Transportation Electrification, 10(4), 8122-8136. https://doi.org/10.1109/tte.2024.3365028

Vancouver

Lucero JNE, Sujan VA, Onori S. An Experimentally Validated Electro-Thermal EV Battery Pack Model Incorporating Cycle-Life Aging and Cell-to-Cell Variations. IEEE Transactions on Transportation Electrification. 2024;10(4):8122-8136. doi:10.1109/tte.2024.3365028

BibTeX
@article{Lucero2024,
  author = {Lucero, Joseph N. E. and Sujan, Vivek A. and Onori, Simona},
  title = {An Experimentally Validated Electro-Thermal EV Battery Pack Model Incorporating Cycle-Life Aging and Cell-to-Cell Variations},
  journal = {IEEE Transactions on Transportation Electrification},
  year = {2024},
  volume = {10},
  number = {4},
  pages = {8122--8136},
  doi = {10.1109/tte.2024.3365028}
}
Kostenlos starten →