EUVIMEDEUVIMED entdecken
Crossref

Three-Level Unipolar/Bipolar Buck–Boost AC–AC Converters With Less Active Switches and No Commutation Issues

Hafiz Furqan Ahmed, Omar Al Zaabi, Mohamed Shawky El Moursi, Khalifa Al Hosani

IEEE Transactions on Transportation Electrification · 2024-06 · 10 (2) · 4184-4200

DOI: 10.1109/tte.2023.3313237 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2024-06. Verfasst von Hafiz Furqan Ahmed und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: Khalifa University of Science and Technology, ASPIRE, the technology program management pillar of Abu Dhabi’s Advanced Technology Research Council (ATRC), via the ASPIRE Virtual Research Institute (VRI) Aw….

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article proposes three-level (TL) buck–boost direct ac–ac converters based on switching-cell configuration with coupled magnetics. The proposed converters use only six active switches and can produce noninverting buck (NIBu), noninverting boost (NIBo), versatile noninverting buck–boost (VNIBB), and inverting buck–boost (IBB) output voltages. Unlike the conventional ac–ac converters, pulsewidth modulation (PWM) dead and overlap times are allowed in the proposed converters without switch voltage and current overshoots, respectively, making it free of commutation issues without requiring extra circuitry and control. Moreover, high-speed power MOSFETs can be utilized without the conduction of their body diodes and related poor reverse recovery issues. The proposed converters generate TL input and output voltages, increasing the voltage levels of input–output inductors and reducing their voltage stresses. In addition, a phase shift PWM control is utilized, which enhances the actual frequency of input and output voltages by twice the operating frequency of the switching devices. Consequently, input and output inductors can be designed much smaller, while reducing input–output current ripples. The proposed circuits also feature shared-ground point between ac source and load and provide continuous input and output currents. Two circuit topologies are proposed: Type-I is a noninverting (unipolar) buck–boost converter with less magnetic components and diodes and Type-II is a bipolar buck–boost converter. The experimental test results on a 400-W laboratory circuit are given to verify the operation of the proposed converter.

Förderung

  • Khalifa University of Science and Technology
  • ASPIRE, the technology program management pillar of Abu Dhabi’s Advanced Technology Research Council (ATRC), via the ASPIRE Virtual Research Institute (VRI) Aw…

Zitieren

APA

Ahmed, H. F., Zaabi, O. A., Moursi, M. S. E., & Hosani, K. A. (2024). Three-Level Unipolar/Bipolar Buck–Boost AC–AC Converters With Less Active Switches and No Commutation Issues. IEEE Transactions on Transportation Electrification, 10(2), 4184-4200. https://doi.org/10.1109/tte.2023.3313237

Vancouver

Ahmed HF, Zaabi OA, Moursi MSE, Hosani KA. Three-Level Unipolar/Bipolar Buck–Boost AC–AC Converters With Less Active Switches and No Commutation Issues. IEEE Transactions on Transportation Electrification. 2024;10(2):4184-4200. doi:10.1109/tte.2023.3313237

BibTeX
@article{Ahmed2024,
  author = {Ahmed, Hafiz Furqan and Zaabi, Omar Al and Moursi, Mohamed Shawky El and Hosani, Khalifa Al},
  title = {Three-Level Unipolar/Bipolar Buck–Boost AC–AC Converters With Less Active Switches and No Commutation Issues},
  journal = {IEEE Transactions on Transportation Electrification},
  year = {2024},
  volume = {10},
  number = {2},
  pages = {4184--4200},
  doi = {10.1109/tte.2023.3313237}
}
Kostenlos starten →