Parameter Identification for SPMSM With Deadbeat Predictive Current Control Using Online PSO
IEEE Transactions on Transportation Electrification · 2024-06 · 10 (2) · 4055-4064
DOI: 10.1109/tte.2023.3309993 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2024-06. Verfasst von Chuanxun Xie und 4 weiteren Autor:innen. Die Arbeit wurde bisher 64-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: High-Efficiency Cooling Design and Suppression Technology of Vibration and Noise for High-Speed and High-Power Density PMSM.
Abstract (Originalsprache)
Deadbeat predictive current control (DPCC) can precisely predict current and calculate voltage vector of surface-mounted permanent magnet synchronous motor (SPMSM). However, the prediction and calculation ability depends on accurate mathematical model, so the model parameters are significant for DPCC. Since motor parameters vary with operation conditions, real-time parameter identification is essential for SPMSM. This article proposes a parameter identification method using online particle swarm optimization (PSO) to obtain the important motor parameters (such as flux linkage and inductance). First, the principle of online PSO is illustrated compared with traditional PSO. Second, the fitness function is designed based on current prediction equations. Then, a fitness modification method is presented to prevent particles from getting stuck in a stagnation state. Finally, a censor algorithm is proposed to ensure that the gbest of the swarm is always correct. Simulation and experiment show that the proposed method can identify the stator inductance and flux linkage simultaneously, and the particles can always converge to the actual value under different working conditions. After parameter identification, the harmonic content and current tracking error caused by parameter mismatch are effectively reduced.
Förderung
- High-Efficiency Cooling Design and Suppression Technology of Vibration and Noise for High-Speed and High-Power Density PMSM
Zitieren
APA
Xie, C., Zhang, S., Li, X., Zhou, Y., & Dong, Y. (2024). Parameter Identification for SPMSM With Deadbeat Predictive Current Control Using Online PSO. IEEE Transactions on Transportation Electrification, 10(2), 4055-4064. https://doi.org/10.1109/tte.2023.3309993
Vancouver
Xie C, Zhang S, Li X, Zhou Y, Dong Y. Parameter Identification for SPMSM With Deadbeat Predictive Current Control Using Online PSO. IEEE Transactions on Transportation Electrification. 2024;10(2):4055-4064. doi:10.1109/tte.2023.3309993
BibTeX
@article{Xie2024,
author = {Xie, Chuanxun and Zhang, Shuo and Li, Xueping and Zhou, Ying and Dong, Yuelin},
title = {Parameter Identification for SPMSM With Deadbeat Predictive Current Control Using Online PSO},
journal = {IEEE Transactions on Transportation Electrification},
year = {2024},
volume = {10},
number = {2},
pages = {4055--4064},
doi = {10.1109/tte.2023.3309993}
}
EUVIMED