EUVIMEDEUVIMED entdecken
Crossref

Single-Phase Charging of Six-Phase Integrated On-Board Battery Charger Using Predictive Current Control

Rawan A. Taha, Wessam E. Abdel-Azim, Abdullah Shawier, Mohamed Y. Metwly, Ayman Samy Abdel-Khalik, Mostafa S. Hamad, Ragi A. Hamdy, Shady Gadoue, Shehab Ahmed

IEEE Transactions on Transportation Electrification · 2024-03 · 10 (1) · 540-552

DOI: 10.1109/tte.2023.3289089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2024-03. Verfasst von Rawan A. Taha und 8 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: Information Technology Industry Development Agency (ITIDA) Information Technology Academia Collaboration (ITAC) Funded Project within the category type of Adva….

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Integrated on-board battery chargers (IOBCs) have shown promise as an elegant charging solution for electric vehicles in recent literature. Although the three-phase charging technique of IOBCs has extensively been discussed in the literature, single-phase charging is still a challenging research topic. The predictive current control (PCC) approach has shown many benefits, including a straightforward algorithm, simple implementation, comparatively quick response, and appropriate performance, when compared to conventional control techniques. This article investigates the impact of single-phase charging of a six-phase-based IOBC system with different winding configurations using PCC, which, up to the best of our knowledge, has not been conceived thus far. Under single-phase charging, the zero-sequence current component is utilized to ensure zero torque production during charging mode. Since the impedance of the zero subspace is highly affected by the employed winding design, the performance of PCC with different winding layouts of either induction machine (IM) or permanent magnet synchronous machine (PMSM) is investigated and compared. The proposed method is experimentally validated using a 1.1-kW six-phase IM and a 2-kW 12-slot/ten-pole PMSM. Finite-element analysis is also carried out to investigate the effect of the single-phase charging mode on the induced radial forces and vibration level when the PM machine is employed.

Förderung

  • Information Technology Industry Development Agency (ITIDA) Information Technology Academia Collaboration (ITAC) Funded Project within the category type of Adva…

Zitieren

APA

Taha, R. A., Abdel-Azim, W. E., Shawier, A., Metwly, M. Y., Abdel-Khalik, A. S., Hamad, M. S., Hamdy, R. A., Gadoue, S., & Ahmed, S. (2024). Single-Phase Charging of Six-Phase Integrated On-Board Battery Charger Using Predictive Current Control. IEEE Transactions on Transportation Electrification, 10(1), 540-552. https://doi.org/10.1109/tte.2023.3289089

Vancouver

Taha RA, Abdel-Azim WE, Shawier A, Metwly MY, Abdel-Khalik AS, Hamad MS, et al. Single-Phase Charging of Six-Phase Integrated On-Board Battery Charger Using Predictive Current Control. IEEE Transactions on Transportation Electrification. 2024;10(1):540-552. doi:10.1109/tte.2023.3289089

BibTeX
@article{Taha2024,
  author = {Taha, Rawan A. and Abdel-Azim, Wessam E. and Shawier, Abdullah and Metwly, Mohamed Y. and Abdel-Khalik, Ayman Samy and Hamad, Mostafa S. and Hamdy, Ragi A. and Gadoue, Shady and Ahmed, Shehab},
  title = {Single-Phase Charging of Six-Phase Integrated On-Board Battery Charger Using Predictive Current Control},
  journal = {IEEE Transactions on Transportation Electrification},
  year = {2024},
  volume = {10},
  number = {1},
  pages = {540--552},
  doi = {10.1109/tte.2023.3289089}
}
Kostenlos starten →