EUVIMEDEUVIMED entdecken
Crossref

Comparative Analysis of Consequent-Pole PM Vernier Machines With Different Rotor Types

Hong Chen, Zhe Zhu, Zongsheng Zhang, Hao Wang

IEEE Transactions on Transportation Electrification · 2024-03 · 10 (1) · 450-461

DOI: 10.1109/tte.2023.3288605 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2024-03. Verfasst von Hong Chen und 3 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: Shandong Provincial Natural Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Taking the advantage of flux modulation effects, consequent-pole permanent magnet (PM) vernier (CPMV) machines have been widely investigated recently, featuring high torque density and PM utilization ratio. However, the low-order harmonics of modulated flux fields additionally cause high iron saturation, which results in relatively low average torque under overload conditions, especially for the CPMV machines with an interior CPM (ICPM) rotor. Therefore, this article proposes two hybrid CPM (HCPM) rotors of PMV machines to improve the overload performance by adding SPMs into the conventional ICPM rotor. First, the topologies of the proposed HCPM rotors are presented, named HCPM1 and HCPM2 rotors, respectively. Then, the HCPM rotors and a conventional ICPM rotor with the V-shaped PM arrangement are designed and optimized to find out the optimal design parameters. Moreover, the electromagnetic performances including back EMF, torque performance, efficiency, flux-weakening capability, and end effect are comprehensively investigated and compared. It indicates that the two proposed HCPM rotors both can generate equivalently high average torque, efficiency, and flux-weakening capability, compared to the conventional ICPM rotor. Furthermore, the proposed HCPM2 rotor can produce $\ge 22.9$ % higher torque at overload conditions. In addition, due to the bipolar PM arrangement, the unipolar flux leakage of the HCPM2 rotor is significantly reduced and lower than 0.05 T. Finally, the prototype of a 12-stator-slot/20-rotor-pole CPMV machine with the HCPM2 rotor is manufactured to validate the finite-element (FE) results.

Förderung

  • Shandong Provincial Natural Science Foundation

Zitieren

APA

Chen, H., Zhu, Z., Zhang, Z., & Wang, H. (2024). Comparative Analysis of Consequent-Pole PM Vernier Machines With Different Rotor Types. IEEE Transactions on Transportation Electrification, 10(1), 450-461. https://doi.org/10.1109/tte.2023.3288605

Vancouver

Chen H, Zhu Z, Zhang Z, Wang H. Comparative Analysis of Consequent-Pole PM Vernier Machines With Different Rotor Types. IEEE Transactions on Transportation Electrification. 2024;10(1):450-461. doi:10.1109/tte.2023.3288605

BibTeX
@article{Chen2024,
  author = {Chen, Hong and Zhu, Zhe and Zhang, Zongsheng and Wang, Hao},
  title = {Comparative Analysis of Consequent-Pole PM Vernier Machines With Different Rotor Types},
  journal = {IEEE Transactions on Transportation Electrification},
  year = {2024},
  volume = {10},
  number = {1},
  pages = {450--461},
  doi = {10.1109/tte.2023.3288605}
}
Kostenlos starten →