EUVIMEDEUVIMED entdecken
Crossref

Dead-Time Optimization and Magnetizing Current Design for a Current-Fed Dual Active Bridge DC–DC Converter to Secure Full Load Range ZVS in Wide Voltage Range

Guo Xu, Yuchen Lin, Liang Yuan, Wenjing Xiong, Yao Sun

IEEE Transactions on Transportation Electrification · 2023-06 · 9 (2) · 2164-2176

DOI: 10.1109/tte.2022.3213442 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2023-06. Verfasst von Guo Xu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Science Fund for Distinguished Young Scholars, Leading Talents of Science and Technology Innovation in Hunan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Current-fed dual active bridge (CF-DAB) converters are widely used because of the small input current ripple and high power density. This article proposes the dead-time optimization methods and the magnetizing current design for a CF-DAB converter under the pulsewidth plus phase shift (PPS) control to achieve full load range zero-voltage-switching (ZVS) in a wide voltage range. In the ZVS analysis, the influence of junction capacitance and dead time is considered, including the dead-time effect on leakage inductance current, which can effectively explain that the CF-DAB converter under PPS control is difficult to achieve ZVS at light load in practice. Based on the analysis, it is first revealed that the CF-DAB converter under PPS control is not sufficient to achieve ZVS only by adjusting the dead time. Based on the new ZVS model and analysis of the dead-time effect, the magnetizing inductance design and dead-time optimization without adding extra control degrees of freedom and auxiliary components are proposed to achieve the full load range ZVS and improve the overall efficiency of the converter in a wide voltage range. Besides, to obtain the low root-mean-square (rms) current, the design of dc inductance and leakage inductance is also investigated. Finally, a 1-kW prototype is built to verify the effectiveness of the proposed solution.

Förderung

  • National Natural Science Foundation of China
  • National Science Fund for Distinguished Young Scholars
  • Leading Talents of Science and Technology Innovation in Hunan

Zitieren

APA

Xu, G., Lin, Y., Yuan, L., Xiong, W., & Sun, Y. (2023). Dead-Time Optimization and Magnetizing Current Design for a Current-Fed Dual Active Bridge DC–DC Converter to Secure Full Load Range ZVS in Wide Voltage Range. IEEE Transactions on Transportation Electrification, 9(2), 2164-2176. https://doi.org/10.1109/tte.2022.3213442

Vancouver

Xu G, Lin Y, Yuan L, Xiong W, Sun Y. Dead-Time Optimization and Magnetizing Current Design for a Current-Fed Dual Active Bridge DC–DC Converter to Secure Full Load Range ZVS in Wide Voltage Range. IEEE Transactions on Transportation Electrification. 2023;9(2):2164-2176. doi:10.1109/tte.2022.3213442

BibTeX
@article{Xu2023,
  author = {Xu, Guo and Lin, Yuchen and Yuan, Liang and Xiong, Wenjing and Sun, Yao},
  title = {Dead-Time Optimization and Magnetizing Current Design for a Current-Fed Dual Active Bridge DC–DC Converter to Secure Full Load Range ZVS in Wide Voltage Range},
  journal = {IEEE Transactions on Transportation Electrification},
  year = {2023},
  volume = {9},
  number = {2},
  pages = {2164--2176},
  doi = {10.1109/tte.2022.3213442}
}
Kostenlos starten →