EUVIMEDEUVIMED entdecken
Crossref

Grain Morphology Effects on Void Formation and Electromigration-Induced Failure in Copper Interconnects

Han Jiang, Susu Li, Zhenchao Li, Leyin Zhang, Yaohua Xu, Saranarayanan Ramachandran, Shuibao Liang

IEEE Transactions on Semiconductor Manufacturing · 2025-11 · 38 (4) · 850-857

DOI: 10.1109/tsm.2025.3593054 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Semiconductor Manufacturing, 2025-11. Verfasst von Han Jiang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 53 Literaturangaben. Gefördert von: Foundation for Introduction of High-Level Talents of Anhui University, University Synergy Innovation Program of Anhui Province, Research Foundation for the Introduction of Talent of Hefei University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electromigration, driven by increasing current densities in scaled integrated circuits, poses a serious reliability challenge in semiconductor manufacturing, often culminating in void formation and interconnect failure. As interconnect dimensions shrink to the nanoscale, the influence of microstructural features and grain morphology on interconnect reliability and degradation mechanisms becomes increasingly significant. In this work, we develop a physics-based phase field model to investigate the void formation and evolution in copper interconnects subjected to electromigration. Our simulations closely align with experimental trends, revealing that voids predominantly emerge at or initiate from the cathode end, with their evolution strongly influenced by grain morphology. In the surface diffusion-limited scenario (SDLS), grain boundaries significantly promote void formation, resulting in increased void sizes. Under the grain boundary diffusion-limited scenario (GBDLS), void nucleation in bamboo structure (BS) and polycrystalline structure (PS) interconnects occurs relatively early, often initiating near the interface between the copper and the capping layer. The voltage distribution exhibits noticeable inhomogeneity, with high electric field intensities localized at grain boundaries and void surfaces. The electromigration-induced mass flux predominantly flows from the bottom right toward the left. Additionally, an increased number of copper grains leads to larger voids, with a more pronounced effect in the SDLS. Furthermore, electromigration-induced void growth progressively reduces electrical conductivity. These findings elucidate the complex interplay between grain morphology, electromigration-driven void formation, and electrical performance degradation in copper interconnects, and are anticipated to offer valuable insights into microstructure-dependent failure mechanisms while supporting process optimization in advanced interconnect fabrication.

Förderung

  • Foundation for Introduction of High-Level Talents of Anhui University
  • University Synergy Innovation Program of Anhui Province
  • Research Foundation for the Introduction of Talent of Hefei University of Technology
  • Natural Science Foundation of Anhui Province
  • National Natural Science Foundation of China

Zitieren

APA

Jiang, H., Li, S., Li, Z., Zhang, L., Xu, Y., Ramachandran, S., & Liang, S. (2025). Grain Morphology Effects on Void Formation and Electromigration-Induced Failure in Copper Interconnects. IEEE Transactions on Semiconductor Manufacturing, 38(4), 850-857. https://doi.org/10.1109/tsm.2025.3593054

Vancouver

Jiang H, Li S, Li Z, Zhang L, Xu Y, Ramachandran S, et al. Grain Morphology Effects on Void Formation and Electromigration-Induced Failure in Copper Interconnects. IEEE Transactions on Semiconductor Manufacturing. 2025;38(4):850-857. doi:10.1109/tsm.2025.3593054

BibTeX
@article{Jiang2025,
  author = {Jiang, Han and Li, Susu and Li, Zhenchao and Zhang, Leyin and Xu, Yaohua and Ramachandran, Saranarayanan and Liang, Shuibao},
  title = {Grain Morphology Effects on Void Formation and Electromigration-Induced Failure in Copper Interconnects},
  journal = {IEEE Transactions on Semiconductor Manufacturing},
  year = {2025},
  volume = {38},
  number = {4},
  pages = {850--857},
  doi = {10.1109/tsm.2025.3593054}
}
Kostenlos starten →