Recognition and Classification of Mixed Defect Pattern Wafer Map Based on Multi-Path DCNN
IEEE Transactions on Semiconductor Manufacturing · 2024-08 · 37 (3) · 316-328
DOI: 10.1109/tsm.2024.3418520 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Semiconductor Manufacturing, 2024-08. Verfasst von Xingna Hou und 4 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Guangxi Natural Science Foundation, Guangxi Key Laboratory of Automation Test and Instrumentation.
Abstract (Originalsprache)
The semiconductor industry is the core industry of the information age. As a key link in the semiconductor industry, wafer fabrication plays a key role in its development. In the testing stage of the wafer, each die of the wafer is detected and marked, and a wafer map with a certain spatial pattern can be formed. The analysis and classification of these spatial patterns can identify the cause of wafer defects, thereby improving production yield. However, as wafer size increases, line widths become smaller, etc., the probability of a mixed defect mode wafer pattern increases. Moreover, the mixed defect mode wafer map is more difficult to identify and classify than the single defect mode wafer map. Therefore, this paper proposes an improved deep convolutional neural network (DCNN) structure model for the recognition and classification of mixed defect pattern wafer maps. From the perspective of increasing the width of the DCNN, the improved network structure can avoid problems such as over-fitting and limited extraction of features due to the continuous deepening of the DCNN. The network is called Multi-Path DCNN (MP-DCNN) structure. The experimental results show that the proposed Multi-Path DCNN structure has better performance and higher classification accuracy than existing methods.
Förderung
- National Natural Science Foundation of China
- Guangxi Natural Science Foundation
- Guangxi Key Laboratory of Automation Test and Instrumentation
- Innovation Project of GUET Graduate Education
- Guangxi Key Laboratory of Intelligent Transportation System
Zitieren
APA
Hou, X., Yi, M., Chen, S., Liu, M., & Zhu, Z. (2024). Recognition and Classification of Mixed Defect Pattern Wafer Map Based on Multi-Path DCNN. IEEE Transactions on Semiconductor Manufacturing, 37(3), 316-328. https://doi.org/10.1109/tsm.2024.3418520
Vancouver
Hou X, Yi M, Chen S, Liu M, Zhu Z. Recognition and Classification of Mixed Defect Pattern Wafer Map Based on Multi-Path DCNN. IEEE Transactions on Semiconductor Manufacturing. 2024;37(3):316-328. doi:10.1109/tsm.2024.3418520
BibTeX
@article{Hou2024,
author = {Hou, Xingna and Yi, Mulan and Chen, Shouhong and Liu, Meiqi and Zhu, Ziren},
title = {Recognition and Classification of Mixed Defect Pattern Wafer Map Based on Multi-Path DCNN},
journal = {IEEE Transactions on Semiconductor Manufacturing},
year = {2024},
volume = {37},
number = {3},
pages = {316--328},
doi = {10.1109/tsm.2024.3418520}
}
EUVIMED