EUVIMEDEUVIMED entdecken
Crossref

Elimination of Si-C Defect on Wafer Surface in High-Temperature SPM Process Through Nitrogen Purge in 300-mm Single-Wafer Chamber

Rajan Kumar Singh, Alfie Lin, Haley Lin, Max Chen, Yvonne Pan, Nancy Cho, Willy Chen, Jamiet Tung, Walt Hu, Wilson Huang

IEEE Transactions on Semiconductor Manufacturing · 2024-08 · 37 (3) · 355-362

DOI: 10.1109/tsm.2024.3416079 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Semiconductor Manufacturing, 2024-08. Verfasst von Rajan Kumar Singh und 9 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: Fab-16, Micron Technology, Taichung City, Taiwan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During semiconductor manufacturing, the high temperature sulfuric acid peroxide mixture (SPM) and airborne molecule contaminants (AMCs) can result in the formation of defects such as Silicon-carbide (Si-C) on the wafer surface. Furthermore, defects adversely affect device performance, yield, and manufacturing productivity. In this work, a novel approach is proposed by introducing an additional nitrogen (N2) gas purge nozzle inside the single wafer chamber to reduce total volatile organic compounds (t-VOC). Additionally, we provide insights into the mechanism underlying defect formation in SPM which has not been previously explained. In SPM process, defects are formed by AMCs and high temperature. So, various AMCs were investigated in this work. Moreover, the correlation of the number of Si-C defect with temperature and duration of chemical flow was also analyzed. The experimental results demonstrated that defects and t-VOC follow the same concentration trend. Our nitrogen purge method effectively diluted the chamber environment, reducing the adhesion energy between contamination particles and the wafer surface. A suitable N2 purging rate inside the single-wafer chamber facilitated the elimination of around 63% of defects from wafer surface. Hence, this approach can be crucial in minimizing the Si-C defects and improving the chamber environment for high-temperature SPM wet-cleaning process.

Förderung

  • Fab-16, Micron Technology, Taichung City, Taiwan

Zitieren

APA

Singh, R. K., Lin, A., Lin, H., Chen, M., Pan, Y., Cho, N., Chen, W., Tung, J., Hu, W., & Huang, W. (2024). Elimination of Si-C Defect on Wafer Surface in High-Temperature SPM Process Through Nitrogen Purge in 300-mm Single-Wafer Chamber. IEEE Transactions on Semiconductor Manufacturing, 37(3), 355-362. https://doi.org/10.1109/tsm.2024.3416079

Vancouver

Singh RK, Lin A, Lin H, Chen M, Pan Y, Cho N, et al. Elimination of Si-C Defect on Wafer Surface in High-Temperature SPM Process Through Nitrogen Purge in 300-mm Single-Wafer Chamber. IEEE Transactions on Semiconductor Manufacturing. 2024;37(3):355-362. doi:10.1109/tsm.2024.3416079

BibTeX
@article{Singh2024,
  author = {Singh, Rajan Kumar and Lin, Alfie and Lin, Haley and Chen, Max and Pan, Yvonne and Cho, Nancy and Chen, Willy and Tung, Jamiet and Hu, Walt and Huang, Wilson},
  title = {Elimination of Si-C Defect on Wafer Surface in High-Temperature SPM Process Through Nitrogen Purge in 300-mm Single-Wafer Chamber},
  journal = {IEEE Transactions on Semiconductor Manufacturing},
  year = {2024},
  volume = {37},
  number = {3},
  pages = {355--362},
  doi = {10.1109/tsm.2024.3416079}
}
Kostenlos starten →