Addressing Boundary Artifacts When Using Radar Imaging on Phased Array Weather Radars
IEEE Transactions on Radar Systems · 2026 · 4 · 930-942
DOI: 10.1109/trs.2026.3691013 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Radar Systems, 2026. Verfasst von Christopher D. Curtis und 2 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Gefördert von: National Oceanic and AtmosphericAdministration (NOAA)/Office of Oceanic and Atmospheric Research (OAR) through NOAA-University of Oklahoma Cooperative, U.S. Department of Commerce.
Abstract (Originalsprache)
Radar imaging is a method for using spoiled transmit beams with multiple receive beams to speed up data collection with phased array radars (PARs). It introduces tradeoffs in sensitivity and angular resolution and can also lead to data artifacts along beam cluster boundaries (boundaries between radar data obtained with adjacent spoiled transmit beams). We show that these data artifacts are due to asymmetric edge beams that occur when the spoiled transmit beam is too narrow for a given set of receive beams. We use both simulations and derivations to quantify the bias in reflectivity gradients along beam cluster boundaries. The derivations are also used to develop design criteria to ensure that the spoiled transmit beam is wide enough to produce symmetric edge beams that mitigate data artifacts. We use data collected with the advanced technology demonstrator (ATD) to show the presence of data artifacts when the spoiled transmit beam is too narrow and the absence of artifacts when the spoiled transmit beam is wide enough to produce symmetric edge beams. We also use a quantitative evaluation of the reflectivity gradient biases in collected weather data to validate both our simulations and derivations.
Förderung
- National Oceanic and AtmosphericAdministration (NOAA)/Office of Oceanic and Atmospheric Research (OAR) through NOAA-University of Oklahoma Cooperative
- U.S. Department of Commerce
Zitieren
APA
Curtis, C. D., Torres, S. M., & Jagannath, R. (2026). Addressing Boundary Artifacts When Using Radar Imaging on Phased Array Weather Radars. IEEE Transactions on Radar Systems, 4, 930-942. https://doi.org/10.1109/trs.2026.3691013
Vancouver
Curtis CD, Torres SM, Jagannath R. Addressing Boundary Artifacts When Using Radar Imaging on Phased Array Weather Radars. IEEE Transactions on Radar Systems. 2026;4:930-942. doi:10.1109/trs.2026.3691013
BibTeX
@article{Curtis2026,
author = {Curtis, Christopher D. and Torres, Sebastián M. and Jagannath, Rakshith},
title = {Addressing Boundary Artifacts When Using Radar Imaging on Phased Array Weather Radars},
journal = {IEEE Transactions on Radar Systems},
year = {2026},
volume = {4},
pages = {930--942},
doi = {10.1109/trs.2026.3691013}
}
EUVIMED