Optimal Inspection Policy for a Single-Unit System Considering Two Failure Modes and Production Wait Time
IEEE Transactions on Reliability · 2023-03 · 72 (1) · 395-407
DOI: 10.1109/tr.2021.3125963 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Reliability, 2023-03. Verfasst von Hui Xiao und 3 weiteren Autor:innen. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
In many real production systems, a system may be stopped due to a lack of demand or exhaustion of raw materials. This is known as production wait and provides a good opportunity for maintenance. Meanwhile, the increased complexity of the modern machines brings new challenges for modeling and analyzing their failure behaviors. To address these real-world problems, this article considers a single-unit system that may fail due to either hard failures or soft failures. The wait time of a system is utilized to conduct inspections and maintenance. The system is replaced when a defect is found during an inspection, a failure occurred or a prespecified age threshold is reached, whichever comes first. The cost model, which is the long-run maintenance cost per unit of time, is derived. The optimal periodical inspection interval and the threshold age to minimize the long run maintenance cost per unit of time is then obtained. A case study is conducted to demonstrate the proposed maintenance model. The study shows using the proposed maintenance model can reduce the cost. Sensitivity analysis illustrates how each cost parameter affects the optimal inspection interval and the optimal age threshold.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Xiao, H., Yan, Y., Kou, G., & Wu, S. (2023). Optimal Inspection Policy for a Single-Unit System Considering Two Failure Modes and Production Wait Time. IEEE Transactions on Reliability, 72(1), 395-407. https://doi.org/10.1109/tr.2021.3125963
Vancouver
Xiao H, Yan Y, Kou G, Wu S. Optimal Inspection Policy for a Single-Unit System Considering Two Failure Modes and Production Wait Time. IEEE Transactions on Reliability. 2023;72(1):395-407. doi:10.1109/tr.2021.3125963
BibTeX
@article{Xiao2023,
author = {Xiao, Hui and Yan, Yuanmin and Kou, Gang and Wu, Shaomin},
title = {Optimal Inspection Policy for a Single-Unit System Considering Two Failure Modes and Production Wait Time},
journal = {IEEE Transactions on Reliability},
year = {2023},
volume = {72},
number = {1},
pages = {395--407},
doi = {10.1109/tr.2021.3125963}
}
EUVIMED