DEMO Divertor Target Mock-Ups With K-Doped Tungsten Laminates Monoblocks
IEEE Transactions on Plasma Science · 2026-06 · 54 (6) · 2737-2743
DOI: 10.1109/tps.2026.3693537 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Plasma Science, 2026-06. Verfasst von Francesco Crea und 8 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Gefördert von: EUROfusion Consortium, funded by European Union via the Euratom Research and Training Program.
Abstract (Originalsprache)
Tungsten (W) is the preferred plasma-facing material (PFM) for European demonstration fusion power plant (EU-DEMO) divertor target. At plasma operative conditions, such as high temperatures, high heat fluxes (HHFs), particle fluxes, and neutron irradiation, W is subject to recrystallization and to embrittlement. A proper doping of W with Potassium (K) can help improve the PFM properties. Nano K-bubbles dispersed at the grain boundaries of W can increase mechanical resistance by hindering grain growth, ultimately leading to the suppression of recrystallization. Newly developed K-doped W laminates (KdWLs) materials were produced by the National Institute of Materials Physics (NIMPs) by means of the field-assisted sintering technique (FAST). At the Special Technologies Laboratories of ENEA Frascati (ENEA-TES), water-cooled ITER-like divertor target mock-ups equipped with KdWL monoblocks were fabricated. The KdWL monoblocks were joined to CuCrZr International Thermonuclear Experimental Reactor (ITER) grade (CuCrZr-IG) cooling pipes by hot radial pressing (HRP) with an oxygen-free copper (OFC, Cu) interlayer manufactured by casting. Nondestructive examination (NDE) by ultrasonic inspection has been performed to assess the quality of the fabrication process and to analyze the structural integrity of the KdWL mock-up after HHF tests. The recent research activity is evaluating whether KdWL can represent a potential candidate armor material for a future water-cooled EU-DEMO divertor target. A dedicated qualification activity of the KdWL divertor target design is currently ongoing, and a mock-up has been produced to withstand cyclic loading up to 2000 cycles at 20 MW/m2. In this work, new KdWL monoblocks were obtained following the optimization of the fabrication process. These monoblocks have been used to fabricate two new divertor target mock-ups to be tested, respectively, at thermal fatigue and overload.
Förderung
- EUROfusion Consortium, funded by European Union via the Euratom Research and Training Program
Zitieren
APA
Crea, F., Luca, R. D., Roccella, S., Caprini, D., Cerocchi, M., Lorusso, P., Verdini, L., Galatanu, A., & You, J. H. (2026). DEMO Divertor Target Mock-Ups With K-Doped Tungsten Laminates Monoblocks. IEEE Transactions on Plasma Science, 54(6), 2737-2743. https://doi.org/10.1109/tps.2026.3693537
Vancouver
Crea F, Luca RD, Roccella S, Caprini D, Cerocchi M, Lorusso P, et al. DEMO Divertor Target Mock-Ups With K-Doped Tungsten Laminates Monoblocks. IEEE Transactions on Plasma Science. 2026;54(6):2737-2743. doi:10.1109/tps.2026.3693537
BibTeX
@article{Crea2026,
author = {Crea, Francesco and Luca, R. De and Roccella, S. and Caprini, D. and Cerocchi, M. and Lorusso, P. and Verdini, L. and Galatanu, A. and You, J. H.},
title = {DEMO Divertor Target Mock-Ups With K-Doped Tungsten Laminates Monoblocks},
journal = {IEEE Transactions on Plasma Science},
year = {2026},
volume = {54},
number = {6},
pages = {2737--2743},
doi = {10.1109/tps.2026.3693537}
}
EUVIMED