Experimental Results From Early Nonplanar NI-HTS Magnet Prototypes for the Columbia Stellarator eXperiment (CSX)
IEEE Transactions on Plasma Science · 2026-06 · 54 (6) · 2710-2715
DOI: 10.1109/tps.2026.3681798 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Plasma Science, 2026-06. Verfasst von D. Schmeling und 14 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 16 Literaturangaben. Gefördert von: Columbia University Internal Funds, Columbia Fusion Research Center, I.I. Rabi Scholars Program at Columbia University.
Abstract (Originalsprache)
The Columbia Stellarator eXperiment (CSX) is an upgrade of the Columbia Nonneutral Torus (CNT) that aims to demonstrate a university-scale, quasi-axisymmetric stellarator using high-temperature superconductors (HTS) technology at an on-axis magnetic field target of 0.5 T. Due to the strain sensitivity of rare-earth barium copper oxide (ReBCO), adapting it to nonplanar geometries requires new winding, structural, and cooling strategies. We report on the results of a staged prototype program (P1, P2, and P3) employing 3-D-printed, sectional aluminum coil frames with winding channels, gimballed constant-tension winding mechanics, and solder potting for radial current redistribution and passive quench mitigation. The first prototype, P1 (planar elliptical and double-pancake), was used to test additive manufacture, sectional joining, and baseline winding, achieving predicted fields at 77 K. P2 (nonplanar and higher strain) was wound to 42 turns, energized at 30–40 K to produce expected magnetic fields, and studied thermal gradients and resistance at up to 110 A (4.5 kAt). Design evolution in P3 introduces concave geometry with dual double-pancakes and 200 turns, and has been commissioned at 20 K, with high-field characterization ongoing. In parallel, sub- $\mu \Omega $ lap joints have been developed. Together, these results de-risk manufacturing, cooling interfaces, quench management, and diagnostics, paving the way for full-size nonplanar HTS stellarator coils for CSX.
Förderung
- Columbia University Internal Funds
- Columbia Fusion Research Center
- I.I. Rabi Scholars Program at Columbia University
Zitieren
APA
Schmeling, D., Russo, M., Gebreamlak, B. T., Kiker, T. J., Skrypek, A. R., Hightower, A. R., Xue, J., Chen, S., Sohaib, S., Martinez, C., Richardson, K. F., Filor, L., Komatsu, S., Liu, L., & Paz-Soldan, C. (2026). Experimental Results From Early Nonplanar NI-HTS Magnet Prototypes for the Columbia Stellarator eXperiment (CSX). IEEE Transactions on Plasma Science, 54(6), 2710-2715. https://doi.org/10.1109/tps.2026.3681798
Vancouver
Schmeling D, Russo M, Gebreamlak BT, Kiker TJ, Skrypek AR, Hightower AR, et al. Experimental Results From Early Nonplanar NI-HTS Magnet Prototypes for the Columbia Stellarator eXperiment (CSX). IEEE Transactions on Plasma Science. 2026;54(6):2710-2715. doi:10.1109/tps.2026.3681798
BibTeX
@article{Schmeling2026,
author = {Schmeling, D. and Russo, M. and Gebreamlak, B. T. and Kiker, T. J. and Skrypek, A. R. and Hightower, A. R. and Xue, J. and Chen, S. and Sohaib, S. and Martinez, C. and Richardson, K. F. and Filor, L. and Komatsu, S. and Liu, L. and Paz-Soldan, C.},
title = {Experimental Results From Early Nonplanar NI-HTS Magnet Prototypes for the Columbia Stellarator eXperiment (CSX)},
journal = {IEEE Transactions on Plasma Science},
year = {2026},
volume = {54},
number = {6},
pages = {2710--2715},
doi = {10.1109/tps.2026.3681798}
}
EUVIMED