Influence of Copper-Ring Driver Thickness on Energy Transfer and Welding Effect of Electromagnetic Pulse Welding
IEEE Transactions on Plasma Science · 2026-04 · 54 (4) · 1411-1421
DOI: 10.1109/tps.2026.3676422 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Plasma Science, 2026-04. Verfasst von Dan Chen und 5 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Gefördert von: Steady Support Research Project of the National Key Laboratory for Nuclear Reactor Technology, China,, National Natural Science Foundation of China, Natural Science Foundation of Chongqing, China.
Abstract (Originalsprache)
The rapid expansion of the nuclear power industry has intensified the demands for composite components including zircaloy and stainless steel. Driver-assisted electromagnetic pulse welding (EMPW) is a promising welding method for the fabrication of these composite components, where the driver thickness is one of the key parameters. However, current studies have not yet provided a sufficient insight of the thickness modification on the energy transfer process and welding effect. In this study, the basic principles and energy transfer process of copper-ring-driver-assisted EMPW are systematically explored. An index is proposed to quantify and predict the effect of driver thickness on the dynamic performance, where the local maximum is obtained when the thickness is equal to the skin depth of driver material. To reveal the spatial–temporal distribution of electromagnetic parameters, a multifield coupled finite-element simulation model is set. Based on the model, the energy transfer efficiency is calculated, where the optimized effect is found with driver thickness of 0.7 mm. Experiments of copper-driver-assisted EMPW are conducted subsequently with different discharge voltages and driver thicknesses for welding zircaloy tube and stainless steel rod. Mechanical properties and microstructural characterization show that, within the selected parameters, welding effect of the zircaloy–stainless steel joint are optimal with 0.7-mm driver thickness, supporting the numerical analysis. This work provides a reference for the optimization of the EMPW technology in the field of nuclear power.
Förderung
- Steady Support Research Project of the National Key Laboratory for Nuclear Reactor Technology, China,
- National Natural Science Foundation of China
- Natural Science Foundation of Chongqing, China
Zitieren
APA
Chen, D., Zhou, Y., Wu, Z., Zheng, Y., Zheng, Y., & Li, C. (2026). Influence of Copper-Ring Driver Thickness on Energy Transfer and Welding Effect of Electromagnetic Pulse Welding. IEEE Transactions on Plasma Science, 54(4), 1411-1421. https://doi.org/10.1109/tps.2026.3676422
Vancouver
Chen D, Zhou Y, Wu Z, Zheng Y, Zheng Y, Li C. Influence of Copper-Ring Driver Thickness on Energy Transfer and Welding Effect of Electromagnetic Pulse Welding. IEEE Transactions on Plasma Science. 2026;54(4):1411-1421. doi:10.1109/tps.2026.3676422
BibTeX
@article{Chen2026,
author = {Chen, Dan and Zhou, Yan and Wu, Zhaoxiao and Zheng, Yong and Zheng, Yunxi and Li, Chengxiang},
title = {Influence of Copper-Ring Driver Thickness on Energy Transfer and Welding Effect of Electromagnetic Pulse Welding},
journal = {IEEE Transactions on Plasma Science},
year = {2026},
volume = {54},
number = {4},
pages = {1411--1421},
doi = {10.1109/tps.2026.3676422}
}
EUVIMED