EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interface Management in the Development of the DTT Remote Handling Facility---REMHAT

Francesco Marino, Andrea Fimiani, Andrea Zoppoli, Andrea Reale, Mauro Dalla Palma, Carlo Carrelli, Giuseppe Di Gironimo

IEEE Transactions on Plasma Science · 2026-06 · 54 (6) · 2729-2736

DOI: 10.1109/tps.2026.3665124 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Plasma Science, 2026-06. Verfasst von Francesco Marino und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EUROfusion Consortium through European Union via the Euratom Research and Training Programme.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Remote handling (RH) procedures in fusion devices are sufficiently complex that a purely virtual verification and validation (V&V) process cannot guarantee reliable operation. Dedicated physical testing in purpose-built facilities is essential to validate and commission RH equipment and to train operators. As part of the divertor Tokamak test (DTT) project, the REMote HAndling Test and training facility (REMHAT) is currently under procurement. Its requirements and functions have been defined, and a preliminary logical architecture has been established. The facility comprises four main subsystems—buildings&services, mock-ups, robots, and control system. Given the integration of multiple subsystems and stakeholders, interface management has been a central focus throughout the procurement packages. Building on a previously presented conceptual design, this article reports advances in the final design of REMHAT and the management of interfaces across subsystems. The mock-ups reproduce the geometry, mass, and stiffness of the relevant DTT components, enabling representative testing of RH equipment and procedures. A model-based approach using the systems modeling language (SysML) has been adopted to manage requirements, functions, and interfaces—particularly between the robots and the control system—resulting in a consistent logical architecture and more efficient conflict resolution among requirements. The final design for the robots and the control system, together with manufacturing activities, is expected to be completed by 2026.

Förderung

  • EUROfusion Consortium through European Union via the Euratom Research and Training Programme

Zitieren

APA

Marino, F., Fimiani, A., Zoppoli, A., Reale, A., Palma, M. D., Carrelli, C., & Gironimo, G. D. (2026). Interface Management in the Development of the DTT Remote Handling Facility---REMHAT. IEEE Transactions on Plasma Science, 54(6), 2729-2736. https://doi.org/10.1109/tps.2026.3665124

Vancouver

Marino F, Fimiani A, Zoppoli A, Reale A, Palma MD, Carrelli C, et al. Interface Management in the Development of the DTT Remote Handling Facility---REMHAT. IEEE Transactions on Plasma Science. 2026;54(6):2729-2736. doi:10.1109/tps.2026.3665124

BibTeX
@article{Marino2026,
  author = {Marino, Francesco and Fimiani, Andrea and Zoppoli, Andrea and Reale, Andrea and Palma, Mauro Dalla and Carrelli, Carlo and Gironimo, Giuseppe Di},
  title = {Interface Management in the Development of the DTT Remote Handling Facility---REMHAT},
  journal = {IEEE Transactions on Plasma Science},
  year = {2026},
  volume = {54},
  number = {6},
  pages = {2729--2736},
  doi = {10.1109/tps.2026.3665124}
}
Kostenlos starten →