An Optimal Current Distribution Method for Minimizing the Peak Arm Current in Modular Multilevel Matrix Converters
IEEE Transactions on Power Electronics · 2026-11 · 41 (11) · 20478-20489
DOI: 10.1109/tpel.2026.3701604 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Power Electronics, 2026-11. Verfasst von Nan Fu und 5 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: Smart Grid-National Science and Technology Major Project.
Abstract (Originalsprache)
The modular multilevel matrix converter (M3C), as one of core components of the low-frequency transmission, requires its arms to withstand the currents from both connected systems simultaneously. Reducing the peak arm currents can effectively decrease the required current capacity of power devices and improve the economic efficiency. This article proposes a novel current distribution method for minimizing the peak arm current in the M3C interfacing a 50-Hz power system with a 20-Hz low-frequency system. First, the theoretical limit of the peak current reduction is determined. Then, the expressions of injected circulating currents with four specific angular frequencies for optimization are identified. Based on the proposed method, the peak arm current can be effectively reduced by about 21% when the amplitude ratio of the currents on both sides of the M3C from 1/3 to 3. As the difference in current amplitudes of the two systems grows, the effectiveness of peak current reduction gradually decreases. The performance and effectiveness of the proposed method are verified on the real-time digital simulator platform.
Förderung
- Smart Grid-National Science and Technology Major Project
Zitieren
APA
Fu, N., Wang, C., Zhang, X., Chen, Q., Wang, K., & Li, Y. (2026). An Optimal Current Distribution Method for Minimizing the Peak Arm Current in Modular Multilevel Matrix Converters. IEEE Transactions on Power Electronics, 41(11), 20478-20489. https://doi.org/10.1109/tpel.2026.3701604
Vancouver
Fu N, Wang C, Zhang X, Chen Q, Wang K, Li Y. An Optimal Current Distribution Method for Minimizing the Peak Arm Current in Modular Multilevel Matrix Converters. IEEE Transactions on Power Electronics. 2026;41(11):20478-20489. doi:10.1109/tpel.2026.3701604
BibTeX
@article{Fu2026,
author = {Fu, Nan and Wang, Chao and Zhang, Xiaoyu and Chen, Qi and Wang, Kui and Li, Yongdong},
title = {An Optimal Current Distribution Method for Minimizing the Peak Arm Current in Modular Multilevel Matrix Converters},
journal = {IEEE Transactions on Power Electronics},
year = {2026},
volume = {41},
number = {11},
pages = {20478--20489},
doi = {10.1109/tpel.2026.3701604}
}
EUVIMED