EUVIMEDEUVIMED entdecken
Crossref

Polycrystalline CsPbBr₃ Radiation Detectors Manufactured via Field-Assisted Sintering Technology

Colleen M. Campbell, Justin A. Reiss, Anwesha Saha, David Jackson, Douglas E. Wolfe, Mark D. Hammig

IEEE Transactions on Nuclear Science · 2026-04 · 73 (4) · 1595-1606

DOI: 10.1109/tns.2026.3669064 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Nuclear Science, 2026-04. Verfasst von Colleen M. Campbell und 5 weiteren Autor:innen. Die Arbeit nennt 70 Literaturangaben. Gefördert von: U.S. Department of Homeland Security Countering Weapons of Mass Destruction Office Academic Research Initiative, Defense Threat Reduction Agency (DTRA) through the Interaction of Ionizing Radiation with Matter University Research Alliance, University of Michigan Lurie Nanofabrication Facility.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal halide perovskite materials are increasingly studied for use as room-temperature semiconductor radiation detectors due to the long carrier lifetimes, which enable thick, high-efficiency sensors. However, producing single crystal compounds like the widely researched CsPbBr 3 can be cost-prohibitive and pose scalability problems, constraining their potential impact, particularly for field deployment applications. In this study, we show that polycrystalline materials with inherent grain boundaries can serve as counting and spectroscopic sensors. Polycrystalline CsPbBr 3 compacts were developed by solid-state sintering of powder using field-assisted sintering technology (FAST). The pressure, temperature, hold time, and application of electric field were varied during compact processing and the resulting microstructures were compared to investigate the effects of these processing parameters on the densification process. X-ray diffraction (XRD) measurements confirmed that single-phase purity persisted throughout the synthesis process. Electrical characterization through dark current-voltage measurements showed a diode-like response due to asymmetric contacts, enabling low leakage current under reverse bias. Radiation detection capabilities were demonstrated by recording the detector’s response to $\alpha $ -particle ( 241 Am) and $\gamma $ -ray ( 137 Cs) sources. These measurements were used to estimate the 15–100 $\mu $ m thick active volume of the detector based on pulse rise time information and spectral-shape evaluations. $\gamma $ -ray measurements demonstrated polycrystalline CsPbBr 3 samples are capable of spectroscopic $\gamma $ -ray detection with 4.5% energy resolution at the 137 Cs 662 keV peak. Electrical conditioning improved detector performance and provided insights into the overall stability of the polycrystalline CsPbBr 3 material and its potential use in practical applications. The addition of polycrystalline materials to the existing body of radiation detectors enables the use of scalable fabrication techniques, potentially broadening the applications of radiation sensors.

Förderung

  • U.S. Department of Homeland Security Countering Weapons of Mass Destruction Office Academic Research Initiative
  • Defense Threat Reduction Agency (DTRA) through the Interaction of Ionizing Radiation with Matter University Research Alliance
  • University of Michigan Lurie Nanofabrication Facility

Zitieren

APA

Campbell, C. M., Reiss, J. A., Saha, A., Jackson, D., Wolfe, D. E., & Hammig, M. D. (2026). Polycrystalline CsPbBr₃ Radiation Detectors Manufactured via Field-Assisted Sintering Technology. IEEE Transactions on Nuclear Science, 73(4), 1595-1606. https://doi.org/10.1109/tns.2026.3669064

Vancouver

Campbell CM, Reiss JA, Saha A, Jackson D, Wolfe DE, Hammig MD. Polycrystalline CsPbBr₃ Radiation Detectors Manufactured via Field-Assisted Sintering Technology. IEEE Transactions on Nuclear Science. 2026;73(4):1595-1606. doi:10.1109/tns.2026.3669064

BibTeX
@article{Campbell2026,
  author = {Campbell, Colleen M. and Reiss, Justin A. and Saha, Anwesha and Jackson, David and Wolfe, Douglas E. and Hammig, Mark D.},
  title = {Polycrystalline CsPbBr₃ Radiation Detectors Manufactured via Field-Assisted Sintering Technology},
  journal = {IEEE Transactions on Nuclear Science},
  year = {2026},
  volume = {73},
  number = {4},
  pages = {1595--1606},
  doi = {10.1109/tns.2026.3669064}
}
Kostenlos starten →