EUVIMEDEUVIMED entdecken
Crossref

A High-Precision Time-Modulated Module Based on Power Cancellation Method

Tingting Fan, Yu Xia, Liu Yang, Zeyang Jin, Xudong Bai, Junping Geng, Jingfeng Chen, Ronghong Jin

IEEE Transactions on Microwave Theory and Techniques · 2026-08 · 74 (8) · 7581-7596

DOI: 10.1109/tmtt.2026.3707923 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Microwave Theory and Techniques, 2026-08. Verfasst von Tingting Fan und 7 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Gusu Leading Talents of Innovation and Entrepreneurship.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A high-precision time-modulated module (TMM) based on power cancellation method is proposed in this article. It breaks through the constraint on the minimum controllable duration of radio frequency (RF) signal, which is constrained by the finite physical characteristics of RF switches. The proposed power cancellation TMM (PCTMM) independently controls two RF signals with equal amplitude and 180° phase difference, creating an equivalent absorption state in the overlapping area through power cancellation, while nonoverlapping segments are preserved as the on-state. As a result, the minimum controllable duration of the RF signal in the PCTMM is determined by the pulse-delay resolution of the modulation signals generated by a field-programmable gate array (FPGA), which is shorter than that in conventional TMMs (CTMMs). This enables improvement in achievable amplitude modulation precision, modulation frequency, and signal bandwidth of the PCTMM. A PCTMM operating at 2.36 GHz was designed using RF switches with a cumulative rise and fall time of 8.9 ns. The measured results demonstrate accurate amplitude modulation, with root mean squares (RMSs) attenuation errors for the fundamental and +1st harmonic components below 0.4 and 0.93 dB, respectively, even at 1% duty cycles and 50 MHz modulation frequency. Under the same conditions, a CTMM using an identical switch exhibited rms errors of 1.36 and 1.77 dB, respectively, and failed to operate below a 7% duty cycle. The total efficiency of the proposed PCTMM is about 3.51% at a 50% duty cycle. This high-precision modulation capability is achieved at the expense of total efficiency. An eight-channel array incorporating the PCTMMs suppressed sidelobe level (SLL) to −39.03 dB at a modulation frequency of 20 MHz.

Förderung

  • National Natural Science Foundation of China
  • Gusu Leading Talents of Innovation and Entrepreneurship

Zitieren

APA

Fan, T., Xia, Y., Yang, L., Jin, Z., Bai, X., Geng, J., Chen, J., & Jin, R. (2026). A High-Precision Time-Modulated Module Based on Power Cancellation Method. IEEE Transactions on Microwave Theory and Techniques, 74(8), 7581-7596. https://doi.org/10.1109/tmtt.2026.3707923

Vancouver

Fan T, Xia Y, Yang L, Jin Z, Bai X, Geng J, et al. A High-Precision Time-Modulated Module Based on Power Cancellation Method. IEEE Transactions on Microwave Theory and Techniques. 2026;74(8):7581-7596. doi:10.1109/tmtt.2026.3707923

BibTeX
@article{Fan2026,
  author = {Fan, Tingting and Xia, Yu and Yang, Liu and Jin, Zeyang and Bai, Xudong and Geng, Junping and Chen, Jingfeng and Jin, Ronghong},
  title = {A High-Precision Time-Modulated Module Based on Power Cancellation Method},
  journal = {IEEE Transactions on Microwave Theory and Techniques},
  year = {2026},
  volume = {74},
  number = {8},
  pages = {7581--7596},
  doi = {10.1109/tmtt.2026.3707923}
}
Kostenlos starten →