EUVIMEDEUVIMED entdecken
Crossref

A Novel Input Component Integrating Both Input Coupler and Circular Polarizer for Helically Corrugated Waveguide Gyro-TWTs

Qixiang Zhao, Keyu Pan, You Lv, E'feng Wang, Chaojun Lei, Xu Zeng, Pan Pan, Jinjun Feng

IEEE Transactions on Microwave Theory and Techniques · 2026-08 · 74 (8) · 6974-6980

DOI: 10.1109/tmtt.2026.3703419 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Microwave Theory and Techniques, 2026-08. Verfasst von Qixiang Zhao und 7 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: Natural Science Foundation Project, Guangxi Natural Science Foundation, in part by Guilin Science Research and Technology Development Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The circular polarizer is a key component in the helically corrugated waveguide (HCW) gyrotron traveling-wave tube (gyro-TWT), converting the linearly polarized wave generated from the input coupler into a circularly polarized wave, thus achieving high interaction efficiency. However, the inclusion of a circular polarizer would increase the length of the interaction circuit, which could cause the backward wave oscillation, significantly compromising the operation stability of HCW gyro-TWT. In this article, we propose and design a novel TE 1,1 mode input component based on a dual-branch waveguide coupling structure, which integrates both the input coupler and circular polarizer. The proposed input component demonstrates high transmission ( $\gt$ –1 dB) and superior polarization performance (the axial ratio of less than 1.2 dB) over a frequency range of 25.3–29.2 GHz (3.90 GHz bandwidth). The length of the input component is only $0.45\lambda $ , where $\lambda $ is the wavelength of the center frequency. To the best of our knowledge, such an input component for HCW gyro-TWT is the most compact waveguide coupler and circular polarizer ever demonstrated so far. To validate this design, a back-to-back model of the proposed input component was fabricated and measured. The measurement results demonstrate good agreement with simulation predictions, with an axial ratio below 1.2 dB and a transmission coefficient exceeding–1.0 dB across the band of 25.6–29.1 GHz (3.50 GHz bandwidth), verifying the feasibility of our proposed input component.

Förderung

  • Natural Science Foundation Project
  • Guangxi Natural Science Foundation
  • in part by Guilin Science Research and Technology Development Project
  • Key Projects of China People’s Police University

Zitieren

APA

Zhao, Q., Pan, K., Lv, Y., Wang, E., Lei, C., Zeng, X., Pan, P., & Feng, J. (2026). A Novel Input Component Integrating Both Input Coupler and Circular Polarizer for Helically Corrugated Waveguide Gyro-TWTs. IEEE Transactions on Microwave Theory and Techniques, 74(8), 6974-6980. https://doi.org/10.1109/tmtt.2026.3703419

Vancouver

Zhao Q, Pan K, Lv Y, Wang E, Lei C, Zeng X, et al. A Novel Input Component Integrating Both Input Coupler and Circular Polarizer for Helically Corrugated Waveguide Gyro-TWTs. IEEE Transactions on Microwave Theory and Techniques. 2026;74(8):6974-6980. doi:10.1109/tmtt.2026.3703419

BibTeX
@article{Zhao2026,
  author = {Zhao, Qixiang and Pan, Keyu and Lv, You and Wang, E'feng and Lei, Chaojun and Zeng, Xu and Pan, Pan and Feng, Jinjun},
  title = {A Novel Input Component Integrating Both Input Coupler and Circular Polarizer for Helically Corrugated Waveguide Gyro-TWTs},
  journal = {IEEE Transactions on Microwave Theory and Techniques},
  year = {2026},
  volume = {74},
  number = {8},
  pages = {6974--6980},
  doi = {10.1109/tmtt.2026.3703419}
}
Kostenlos starten →