EUVIMEDEUVIMED entdecken
Crossref

A Coupler-Based Balanced Doherty PA Architecture for Mitigating Load Mismatch

Jun Hua, Gaoming Xu, Weimin Shi, Wenhua Zhao, Siyang Lu, Yan Lv, Jinghao Chen, Taijun Liu, Fadhel M. Ghannouchi

IEEE Transactions on Microwave Theory and Techniques · 2026-08 · 74 (8) · 7210-7221

DOI: 10.1109/tmtt.2026.3700625 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Microwave Theory and Techniques, 2026-08. Verfasst von Jun Hua und 8 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Gefördert von: Natural Science Foundation of China, Zhejiang Provincial Natural Science Foundation of China, Youth Science and Technology Innovation Leading Talent Project of Ningbo.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To mitigate the performance degradation of power amplifiers (PAs) induced by load-mismatch resulting from mutual coupling effects between antenna arrays and beam scanning, this article proposes a PA architecture, namely the coupler-based balanced Doherty PA (CBB-DPA). For minor load-mismatch scenarios, the CBB-DPA achieves superior performance without requiring external control circuitry, significantly reducing system operating costs. Under more severe load-mismatch conditions, the CBB-DPA also demonstrates exceptional resilience against load mismatch by configuring its submodules in different operating modes while simultaneously adjusting the drain voltage, thereby compensating for wide-range impedance deviations. The simulation results demonstrate that for a load-mismatch condition with a 3:1 voltage standing wave ratio (VSWR), the introduction of mode switching results in a 1 dB increase in output power and an efficiency improvement of over 5%. The CBB-DPA architecture preserves the intrinsic load-mismatch resilience of the balanced PA (BPA) while inheriting the high-efficiency operation characteristic of the Doherty PA (DPA) across a wide dynamic power range. Experimental results demonstrate that, when the load mismatch is on the 2:1 VSWR circle, the CBB-DPA achieves a saturated output power of 44.7–45.3 dBm, a saturated drain efficiency (DE) of 63%–68%, and a 6 dB back-off DE of 51.5%–57%. Under a 3:1 VSWR load condition, it delivers a saturated output power of 45.6–46.0 dBm, a saturated DE of 53.7%–62%, and a 6 dB back-off DE of 43.9%–55.6%.

Förderung

  • Natural Science Foundation of China
  • Zhejiang Provincial Natural Science Foundation of China
  • Youth Science and Technology Innovation Leading Talent Project of Ningbo

Zitieren

APA

Hua, J., Xu, G., Shi, W., Zhao, W., Lu, S., Lv, Y., Chen, J., Liu, T., & Ghannouchi, F. M. (2026). A Coupler-Based Balanced Doherty PA Architecture for Mitigating Load Mismatch. IEEE Transactions on Microwave Theory and Techniques, 74(8), 7210-7221. https://doi.org/10.1109/tmtt.2026.3700625

Vancouver

Hua J, Xu G, Shi W, Zhao W, Lu S, Lv Y, et al. A Coupler-Based Balanced Doherty PA Architecture for Mitigating Load Mismatch. IEEE Transactions on Microwave Theory and Techniques. 2026;74(8):7210-7221. doi:10.1109/tmtt.2026.3700625

BibTeX
@article{Hua2026,
  author = {Hua, Jun and Xu, Gaoming and Shi, Weimin and Zhao, Wenhua and Lu, Siyang and Lv, Yan and Chen, Jinghao and Liu, Taijun and Ghannouchi, Fadhel M.},
  title = {A Coupler-Based Balanced Doherty PA Architecture for Mitigating Load Mismatch},
  journal = {IEEE Transactions on Microwave Theory and Techniques},
  year = {2026},
  volume = {74},
  number = {8},
  pages = {7210--7221},
  doi = {10.1109/tmtt.2026.3700625}
}
Kostenlos starten →