EUVIMEDEUVIMED entdecken
Crossref

Analysis and Design of mm-Wave CMOS Power Amplifier Using Stacked Parallel Power-Combining Transformers

Kyutaek Oh, Hyunjin Ahn, Jong-Ryul Yang, Ilku Nam, Ockgoo Lee

IEEE Transactions on Microwave Theory and Techniques · 2026-07 · 74 (7) · 6193-6207

DOI: 10.1109/tmtt.2026.3684474 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Microwave Theory and Techniques, 2026-07. Verfasst von Kyutaek Oh und 4 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Gefördert von: Samsung, Institute of Information and Communications Technology Planning and Evaluation (IITP) through Korean Government South Korean Ministry of Science and ICT (MSIT), National Research Foundation of Korea (NRF) through Korean Government.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a high-power linear CMOS power amplifier (PA) for mm-wave 5G applications. To design high-output and high-efficiency PA, a low-loss power combiner needs to be used for combining the output power of multiple-unit PAs. To determine the proper power combiner structure, various transformer-based power combiner structures were compared. For comparison, we derived equations regarding the efficiency and impedance of each combiner structure. Through theoretical analysis and exemplary prototype layout-based electromagnetic (EM) simulations, it was confirmed that the power combiners based on the stacked parallel power-combining transformer (PCT) structure exhibit higher efficiency compared with other transformer-based power combiner structures, specifically when using stacked transformer configurations with a 1:1 turn ratio for the mm- wave band. A stacked parallel–series (PS) power combiner employing the stacked PCT configuration is proposed. It has been verified that the proposed structure is suitable for high-power and high-efficiency mm-wave PAs compared with other power combiners. The PA fabricated using a 65-nm bulk CMOS process showed 26.1-dBm saturated output power (PSAT) while achieving a 37.3% peak PAE (PAEmax) for the continuous-wave (CW) signal. The PA achieved an average output power (Pavg) of 15.95 dBm and a PAEavg of 7.4% with −25-dB rms EVM at 26 GHz.

Förderung

  • Samsung
  • Institute of Information and Communications Technology Planning and Evaluation (IITP) through Korean Government South Korean Ministry of Science and ICT (MSIT)
  • National Research Foundation of Korea (NRF) through Korean Government

Zitieren

APA

Oh, K., Ahn, H., Yang, J., Nam, I., & Lee, O. (2026). Analysis and Design of mm-Wave CMOS Power Amplifier Using Stacked Parallel Power-Combining Transformers. IEEE Transactions on Microwave Theory and Techniques, 74(7), 6193-6207. https://doi.org/10.1109/tmtt.2026.3684474

Vancouver

Oh K, Ahn H, Yang J, Nam I, Lee O. Analysis and Design of mm-Wave CMOS Power Amplifier Using Stacked Parallel Power-Combining Transformers. IEEE Transactions on Microwave Theory and Techniques. 2026;74(7):6193-6207. doi:10.1109/tmtt.2026.3684474

BibTeX
@article{Oh2026,
  author = {Oh, Kyutaek and Ahn, Hyunjin and Yang, Jong-Ryul and Nam, Ilku and Lee, Ockgoo},
  title = {Analysis and Design of mm-Wave CMOS Power Amplifier Using Stacked Parallel Power-Combining Transformers},
  journal = {IEEE Transactions on Microwave Theory and Techniques},
  year = {2026},
  volume = {74},
  number = {7},
  pages = {6193--6207},
  doi = {10.1109/tmtt.2026.3684474}
}
Kostenlos starten →