EUVIMEDEUVIMED entdecken
Crossref

Mechanically Reconfigurable Reflective-Mode Phase-Variation Sensors: A Strategy for Sensitivity Optimization and Control

Pau Casacuberta, Paris Vélez, Lijuan Su, Xavier Canalias, Nazmia Kurniawati, Ferran Martín

IEEE Transactions on Microwave Theory and Techniques · 2026-03 · 74 (3) · 2573-2586

DOI: 10.1109/tmtt.2025.3641485 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Microwave Theory and Techniques, 2026-03. Verfasst von Pau Casacuberta und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 105 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a strategy for sensitivity optimization and control in reflective-mode phase-variation microwave sensors that exploits the resonance and antiresonance of an open-ended 50- $\Omega $ line terminated with a complementary split ring resonator (CSRR), the sensing element, etched in the ground plane. This structure can be described by means of a capacitor (that accounts for the electric coupling between the line and the CSRR) series-connected to a grounded parallel resonator (modeling the CSRR) with a capacitance that depends on the dielectric constant of the so-called material under test (MUT), or analyte. The structure exhibits a resonance and an antiresonance frequency. Since the phase of the reflection coefficient, the output variable, should experience a variation of 180° between such frequencies, by designing the sensor with closely spaced resonance and antiresonance frequencies, the derivative of the phase with frequency is expected to be very high between such frequencies, a sufficient condition to boost the sensitivity. In this work, it is shown that the relative separation between the resonance and antiresonance frequencies can be mechanically controlled, thereby providing an approach for sensitivity tuning. Validation is carried out by considering both nontunable and mechanically reconfigurable sensors. The maximum sensitivity in one of the reported nontunable devices is 1270°, corresponding to a figure of merit (FoM), or ratio between the maximum sensitivity and the area of the sensing resonator expressed in squared guided wavelengths, of 135 $848^{\circ } /\lambda ^{2}$ , but such sensitivity is further enhanced (5 times) in the reported tunable sensor.

Zitieren

APA

Casacuberta, P., Vélez, P., Su, L., Canalias, X., Kurniawati, N., & Martín, F. (2026). Mechanically Reconfigurable Reflective-Mode Phase-Variation Sensors: A Strategy for Sensitivity Optimization and Control. IEEE Transactions on Microwave Theory and Techniques, 74(3), 2573-2586. https://doi.org/10.1109/tmtt.2025.3641485

Vancouver

Casacuberta P, Vélez P, Su L, Canalias X, Kurniawati N, Martín F. Mechanically Reconfigurable Reflective-Mode Phase-Variation Sensors: A Strategy for Sensitivity Optimization and Control. IEEE Transactions on Microwave Theory and Techniques. 2026;74(3):2573-2586. doi:10.1109/tmtt.2025.3641485

BibTeX
@article{Casacuberta2026,
  author = {Casacuberta, Pau and Vélez, Paris and Su, Lijuan and Canalias, Xavier and Kurniawati, Nazmia and Martín, Ferran},
  title = {Mechanically Reconfigurable Reflective-Mode Phase-Variation Sensors: A Strategy for Sensitivity Optimization and Control},
  journal = {IEEE Transactions on Microwave Theory and Techniques},
  year = {2026},
  volume = {74},
  number = {3},
  pages = {2573--2586},
  doi = {10.1109/tmtt.2025.3641485}
}
Kostenlos starten →