Setup-Independent Quadrature Imbalance Calibration for Microwave and Millimeter-Wave Doppler Radars
IEEE Transactions on Microwave Theory and Techniques · 2026-02 · 74 (2) · 1893-1902
DOI: 10.1109/tmtt.2025.3630829 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Microwave Theory and Techniques, 2026-02. Verfasst von Emanuele Cardillo. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Existing IQ imbalance correction methods are often impractical or challenging in real cases. Indeed, they usually require hardware modification or expensive precision actuators to create accurate and, above all, small movements. This last characteristic is strategic; indeed, if the range varies significantly during measurement, the signal-to-noise ratio (SNR) is not constant, and thus, the IQ module varies, too. As explained in the text, a constant SNR during calibration is often required to ensure that the IQ imbalance is solely due to hardware imperfections and not to changing environmental conditions. This poses several practical challenges in replicating the procedures described in the current literature. In this article, an automatic IQ imbalance calibration method is proposed; it does not require any specific measurement settings. It finds the IQ trajectory with the maximum SNR, thus ensuring not only a constant SNR but also optimal performance, as the accuracy of ellipse-fitting methods is directly proportional to the SNR. The theoretical basis of the calibration method is carefully provided and validated with simulations and measurements. Its effectiveness is investigated both for displacement and micro-Doppler signature detection. This method can be used for many radar applications, from physiological and healthcare sensing to motion tracking and gesture detection, as shown experimentally; moreover, it can be implemented online, thus enabling the system’s automatic calibration.
Zitieren
APA
Cardillo, E. (2026). Setup-Independent Quadrature Imbalance Calibration for Microwave and Millimeter-Wave Doppler Radars. IEEE Transactions on Microwave Theory and Techniques, 74(2), 1893-1902. https://doi.org/10.1109/tmtt.2025.3630829
Vancouver
Cardillo E. Setup-Independent Quadrature Imbalance Calibration for Microwave and Millimeter-Wave Doppler Radars. IEEE Transactions on Microwave Theory and Techniques. 2026;74(2):1893-1902. doi:10.1109/tmtt.2025.3630829
BibTeX
@article{Cardillo2026,
author = {Cardillo, Emanuele},
title = {Setup-Independent Quadrature Imbalance Calibration for Microwave and Millimeter-Wave Doppler Radars},
journal = {IEEE Transactions on Microwave Theory and Techniques},
year = {2026},
volume = {74},
number = {2},
pages = {1893--1902},
doi = {10.1109/tmtt.2025.3630829}
}
EUVIMED