EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel S-Parameter Model for Circular Polymer Microwave Fibers in a Physical Setup

Stefan Wögerbauer, Helmut Paulitsch, Siegfried Krainer, Michael Ernst Gadringer

IEEE Transactions on Microwave Theory and Techniques · 2026-02 · 74 (2) · 1249-1265

DOI: 10.1109/tmtt.2025.3626866 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Microwave Theory and Techniques, 2026-02. Verfasst von Stefan Wögerbauer und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austrian Research Promotion Agency, Federal Ministry of the Republic of Austria for Climate Action, Environment, Energy, Mobility, Innovation and Technology Promoted through “Produktion der Zukun….

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer microwave fibers (PMFs) are a well-suited solution for interconnections of mm-wave signals. Their highly immune characteristic against electromagnetic interference makes them very attractive for short- to mid-range high-speed data links. High-performance computing, 5G/6G communication, or aerospace systems will enhance their performance by using superior designed PMFs. Predicting the behavior of PMF interconnects is essential to gain full advantage of their properties, especially the awareness of the influence of material and dimensions to the frequency response. This work focuses on theoretically predicting the behavior of PMFs with a circular cross section in physical installations. In that way, the full two-port S-parameters of the interconnect, their losses, and the influence of bends are deduced and summed up into a single model. Additionally, the dimensions of the fibers’ cross section and the physical setup are discussed, focusing on their influence on the S-parameters. Simulations were conducted to validate the mathematical models in the frequency range from $\approx 48$ up to 110 GHz. Thereafter, we compare VNA measurements of a physical setup in the laboratory with the theoretically calculated model in the frequency range from 25 up to 110 GHz. The used fiber had a dielectric constant of $\epsilon _{r}=2.2$ , a diameter of 3.65 mm, and a loss factor of $\tan \delta =0.0004$ . The predicted model, which works in general for all dielectric waveguides with a circular cross section, agrees with the measurements with an accuracy better than $1{\,}\text {dB}$ deviation and lower than $10{\,}\text {ps}$ difference in the group delay.

Förderung

  • Austrian Research Promotion Agency
  • Federal Ministry of the Republic of Austria for Climate Action, Environment, Energy, Mobility, Innovation and Technology Promoted through “Produktion der Zukun…

Zitieren

APA

Wögerbauer, S., Paulitsch, H., Krainer, S., & Gadringer, M. E. (2026). A Novel S-Parameter Model for Circular Polymer Microwave Fibers in a Physical Setup. IEEE Transactions on Microwave Theory and Techniques, 74(2), 1249-1265. https://doi.org/10.1109/tmtt.2025.3626866

Vancouver

Wögerbauer S, Paulitsch H, Krainer S, Gadringer ME. A Novel S-Parameter Model for Circular Polymer Microwave Fibers in a Physical Setup. IEEE Transactions on Microwave Theory and Techniques. 2026;74(2):1249-1265. doi:10.1109/tmtt.2025.3626866

BibTeX
@article{Wgerbauer2026,
  author = {Wögerbauer, Stefan and Paulitsch, Helmut and Krainer, Siegfried and Gadringer, Michael Ernst},
  title = {A Novel S-Parameter Model for Circular Polymer Microwave Fibers in a Physical Setup},
  journal = {IEEE Transactions on Microwave Theory and Techniques},
  year = {2026},
  volume = {74},
  number = {2},
  pages = {1249--1265},
  doi = {10.1109/tmtt.2025.3626866}
}
Kostenlos starten →