EUVIMEDEUVIMED entdecken
Crossref

28-GHz SiGe Bidirectional 4-Element Beamformer Chip for 5G Applications Based on a 4-Way Ultracompact Switchable Power Divider

Aniello Franzese, Renato Negra, Andrea Malignaggi, Nebojsa Maletic, Batuhan Sutbas, Corrado Carta

IEEE Transactions on Microwave Theory and Techniques · 2024-12 · 72 (12) · 7050-7060

DOI: 10.1109/tmtt.2024.3409571 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Microwave Theory and Techniques, 2024-12. Verfasst von Aniello Franzese und 5 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 43 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article describes the design of a 28-GHz bidirectional 4-element beamformer chip based on a 4-way ultracompact switchable power divider (SPD). The addition of the divider solves the ineffective power splitting and the inefficient use of valuable chip area. Therefore, this work is devoted to remove the drawbacks associated with the Wilkinson power dividers (PDs) and single-pole double-throw switches (SPDTs) leveraging a single-inductor N-way PD topology. In this article, the PD design is presented and its analysis is carried out, extending the previous literature. In addition, the embedding of the SPDTs within the PD is described in detail. Employing the proposed technique, the chip size is limited only to the dimensions of the main RF building blocks, analog circuitry, and digital logic; hence, eliminating the cumbersome divider chain which connects the transmitting/receiving (TRx) elements before going on-board. Finally, the measured performance of the beamformer designed in the IHP SG13S SiGe BiCMOS technology is reported. The beamformer achieves an $ {{\mathrm {OP}} {_{\text {1 dB}}}}$ of 11 dBm in Tx-mode with a power consumption of 231 mW for each element, whereas an ${{\mathrm {IP}} {_{\text {1 dB}}}}$ of -28 dBm in Rx-mode is achieved consuming only 92 mW per element. The chip occupies a silicon area of $2.9\times 2.2$ mm2. Moreover, a shift step of 11.25° is achieved with 2.4° and 0.4 dB of phase and amplitude root-mean-square error (RMSE), respectively. To the best of the authors’ knowledge, this is the first beamformer which substitutes the divider chain with a novel SPD. In this way, the chip length could be reduced by 1 mm with respect to their previous design, which proves that the proposed technique is promising for chips with high number of TRx elements.

Zitieren

APA

Franzese, A., Negra, R., Malignaggi, A., Maletic, N., Sutbas, B., & Carta, C. (2024). 28-GHz SiGe Bidirectional 4-Element Beamformer Chip for 5G Applications Based on a 4-Way Ultracompact Switchable Power Divider. IEEE Transactions on Microwave Theory and Techniques, 72(12), 7050-7060. https://doi.org/10.1109/tmtt.2024.3409571

Vancouver

Franzese A, Negra R, Malignaggi A, Maletic N, Sutbas B, Carta C. 28-GHz SiGe Bidirectional 4-Element Beamformer Chip for 5G Applications Based on a 4-Way Ultracompact Switchable Power Divider. IEEE Transactions on Microwave Theory and Techniques. 2024;72(12):7050-7060. doi:10.1109/tmtt.2024.3409571

BibTeX
@article{Franzese2024,
  author = {Franzese, Aniello and Negra, Renato and Malignaggi, Andrea and Maletic, Nebojsa and Sutbas, Batuhan and Carta, Corrado},
  title = {28-GHz SiGe Bidirectional 4-Element Beamformer Chip for 5G Applications Based on a 4-Way Ultracompact Switchable Power Divider},
  journal = {IEEE Transactions on Microwave Theory and Techniques},
  year = {2024},
  volume = {72},
  number = {12},
  pages = {7050--7060},
  doi = {10.1109/tmtt.2024.3409571}
}
Kostenlos starten →