EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A 220–260-GHz Silicon-Micromachined Waveguide MEMS Crossover Switch

Armin Karimi, Umer Shah, Suxian Yu, Joachim Oberhammer

IEEE Transactions on Microwave Theory and Techniques · 2024-09 · 72 (9) · 5060-5070

DOI: 10.1109/tmtt.2024.3373870 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Microwave Theory and Techniques, 2024-09. Verfasst von Armin Karimi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CAR2TERA Project from European Union’s Horizon 2020 Research and Innovation Program through Kungliga Tekniska högskolan, Swedish Foundation for Strategic Research, Marie Sklodowska-Curie.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a novel subterahertz (sub-THz) crossover waveguide switch concept operating in the 220–260-GHz frequency band. The crossover switching circuit is implemented by two hybrid couplers and two single-pole-single-throw (SPST) switching mechanisms, utilizing microelectromechanically reconfigurable switching surfaces. The silicon-micromachined crossover switch prototype is very compact, with a total footprint of $5.6\times 5\times1.2$ mm, including four standard WR-3.4 waveguide ports and the waveguide routing to these ports. The measured insertion loss (IL) is 0.9–1.4 dB in the crossover state and 0.8–1.3 dB in the straight state from 220 to 260 GHz, and the isolation (ISO) is better than 29.3 and 29 dB, respectively, for these states. The measured return loss (RL) is better than 14 dB in the crossover state and better than 13.6 dB in the straight state. Besides, the measured input-to-input ISO is better than 13.7 and 34 dB in the crossover and straight states, respectively. The measurement results are in excellent agreement with the simulation data. Moreover, the signal paths are fully symmetric for all input-to-output signal paths, making the crossover switching circuit suitable for redundancy applications.

Förderung

  • CAR2TERA Project from European Union’s Horizon 2020 Research and Innovation Program through Kungliga Tekniska högskolan
  • Swedish Foundation for Strategic Research
  • Marie Sklodowska-Curie

Zitieren

APA

Karimi, A., Shah, U., Yu, S., & Oberhammer, J. (2024). A 220–260-GHz Silicon-Micromachined Waveguide MEMS Crossover Switch. IEEE Transactions on Microwave Theory and Techniques, 72(9), 5060-5070. https://doi.org/10.1109/tmtt.2024.3373870

Vancouver

Karimi A, Shah U, Yu S, Oberhammer J. A 220–260-GHz Silicon-Micromachined Waveguide MEMS Crossover Switch. IEEE Transactions on Microwave Theory and Techniques. 2024;72(9):5060-5070. doi:10.1109/tmtt.2024.3373870

BibTeX
@article{Karimi2024,
  author = {Karimi, Armin and Shah, Umer and Yu, Suxian and Oberhammer, Joachim},
  title = {A 220–260-GHz Silicon-Micromachined Waveguide MEMS Crossover Switch},
  journal = {IEEE Transactions on Microwave Theory and Techniques},
  year = {2024},
  volume = {72},
  number = {9},
  pages = {5060--5070},
  doi = {10.1109/tmtt.2024.3373870}
}
Kostenlos starten →