A Multipurpose D -Band Vector Modulator for FMCW and PMCW Sensing Applications in 130 nm SiGe
IEEE Transactions on Microwave Theory and Techniques · 2024-08 · 72 (8) · 4579-4589
DOI: 10.1109/tmtt.2024.3365945 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Microwave Theory and Techniques, 2024-08. Verfasst von Jonathan Bott und 1 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Research Foundation (“Deutsche Forschungsgemeinschaft”), German Ministry for Economic Affairs and Climate Action (BMWK) in the Project URBANSens within the research program LuFo VI-2.
Abstract (Originalsprache)
The increased deployment of radar systems raises concerns about mutual interference among radar sensors sharing the same frequency band. Phase-modulated continuous wave (PMCW) techniques with orthogonal transmit codes can mitigate those problems. Moreover, many applications require 3-D detection, which needs either a steerable antenna beam (analog beamforming) or independent receive channels (digital beamforming). In this article, we present a $\mathbf {125} \, \text {GHz}$ vector modulator (VM) that can either shift the phase for phased-array operation or can be turned off for time-division multiple-input multiple-output (MIMO) operation. Phase-shifting is possible using analog (slow but fine-stepped) and digital (fast but course-stepped) control signals. Also, both interfaces can be used simultaneously to create steerable PMCW beams. The VM was fabricated using the B11HFC technology from Infineon Technologies AG and consists of four compactly interconnected power amplifiers (PAs): Two are fed with an in-phase ( $\mathbf {I}$ ) signal, and two are fed with a quadrature ( $\mathbf {Q}$ ) signal. Within the PA pairs, the PAs are cross-connected to a common inductive load so the $\mathbf {I}$ and $\mathbf {Q}$ signals can be inverted, generating output phases between $\mathbf {0}^{\circ} $ and $\mathbf {360}^{\circ} $ .
Förderung
- German Research Foundation (“Deutsche Forschungsgemeinschaft”)
- German Ministry for Economic Affairs and Climate Action (BMWK) in the Project URBANSens within the research program LuFo VI-2
Zitieren
APA
Bott, J., & Pohl, N. (2024). A Multipurpose D -Band Vector Modulator for FMCW and PMCW Sensing Applications in 130 nm SiGe. IEEE Transactions on Microwave Theory and Techniques, 72(8), 4579-4589. https://doi.org/10.1109/tmtt.2024.3365945
Vancouver
Bott J, Pohl N. A Multipurpose D -Band Vector Modulator for FMCW and PMCW Sensing Applications in 130 nm SiGe. IEEE Transactions on Microwave Theory and Techniques. 2024;72(8):4579-4589. doi:10.1109/tmtt.2024.3365945
BibTeX
@article{Bott2024,
author = {Bott, Jonathan and Pohl, Nils},
title = {A Multipurpose D -Band Vector Modulator for FMCW and PMCW Sensing Applications in 130 nm SiGe},
journal = {IEEE Transactions on Microwave Theory and Techniques},
year = {2024},
volume = {72},
number = {8},
pages = {4579--4589},
doi = {10.1109/tmtt.2024.3365945}
}
EUVIMED