EUVIMEDEUVIMED entdecken
Crossref

WR-3.4 Band Waveguide and Bandpass Filters Using Copper Additive Manufacturing

Xiaozhu Wen, Yang Yu, Guanghua Shi, Zhen Wang, Qingsha S. Cheng, Yun Li, Anxue Zhang, Cheng Guo

IEEE Transactions on Microwave Theory and Techniques · 2023-03 · 71 (3) · 1190-1200

DOI: 10.1109/tmtt.2022.3217772 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Microwave Theory and Techniques, 2023-03. Verfasst von Xiaozhu Wen und 7 weiteren Autor:innen. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Laboratory Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a waveguide with a pair of ${E}$ -plane bends and two waveguide bandpass filters (BPFs) which operate in WR-3.4 band (220–330 GHz). These devices are fabricated by a micro metal additive manufacturing (M-MAM) technology on copper in one piece. Both filters are fifth order and operate at a center frequency of 280 GHz with a bandwidth of 8 GHz. Cylindrical resonators are employed for filter design. The standard feed waveguides are designed in bend structures, facilitating the measurements. The M-MAM technology is a layer-by-layer additive manufacturing process constructing the waveguide devices in five layers. Since the layout of the devices has a strong impact on the electrostatic field distributions and hence the electroforming quality, both full-wave electromagnetic (EM) simulations and electrostatic analysis are simultaneously considered in the device design. It eases the subsequent electroforming and polishing processes, effectively improving the performance of the devices. The insertion losses and return losses of the measured filters are lower than 1.65 dB and better than 15 dB. The center frequency shifts are less than 0.3%. The excellent results attribute to the delicate co-design method between EM and electrostatic analyses encountered both in the filter design and in the additive manufacturing process.

Förderung

  • National Natural Science Foundation of China
  • National Key Laboratory Foundation

Zitieren

APA

Wen, X., Yu, Y., Shi, G., Wang, Z., Cheng, Q. S., Li, Y., Zhang, A., & Guo, C. (2023). WR-3.4 Band Waveguide and Bandpass Filters Using Copper Additive Manufacturing. IEEE Transactions on Microwave Theory and Techniques, 71(3), 1190-1200. https://doi.org/10.1109/tmtt.2022.3217772

Vancouver

Wen X, Yu Y, Shi G, Wang Z, Cheng QS, Li Y, et al. WR-3.4 Band Waveguide and Bandpass Filters Using Copper Additive Manufacturing. IEEE Transactions on Microwave Theory and Techniques. 2023;71(3):1190-1200. doi:10.1109/tmtt.2022.3217772

BibTeX
@article{Wen2023,
  author = {Wen, Xiaozhu and Yu, Yang and Shi, Guanghua and Wang, Zhen and Cheng, Qingsha S. and Li, Yun and Zhang, Anxue and Guo, Cheng},
  title = {WR-3.4 Band Waveguide and Bandpass Filters Using Copper Additive Manufacturing},
  journal = {IEEE Transactions on Microwave Theory and Techniques},
  year = {2023},
  volume = {71},
  number = {3},
  pages = {1190--1200},
  doi = {10.1109/tmtt.2022.3217772}
}
Kostenlos starten →