Electromagnetic Design of Hybrid Stepper Motors Accounting for Magnetic Saturation Toward Servo-Level Torque Density
IEEE Transactions on Magnetics · 2026-10 · 62 (10) · 8203505-8203505
DOI: 10.1109/tmag.2026.3695656 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Magnetics, 2026-10. Verfasst von Min-Fu Hsieh und 3 weiteren Autor:innen. Die Arbeit nennt 10 Literaturangaben. Gefördert von: National Science and Technology Council, Taiwan.
Abstract (Originalsprache)
This article aims to close the performance gap between stepper and servo motors by enhancing the electromagnetic capabilities of a hybrid stepper motor to approach servo-level performance while preserving its advantage of low permanent-magnet usage. Due to the complex 3-D magnetic circuits and highly saturated operation of hybrid stepper motors, traditional analytical models often fail to accurately predict torque and assist in structural design. Therefore, this study develops a saturation-aware electromagnetic analysis to clarify the effects of tooth alignment, local saturation, flux linkage, and back electromotive force (back EMF) on torque density. By analyzing the relationship among rotor–stator tooth alignment, magnetic saturation, flux linkage, and back EMF through decomposition of the rotor into multiple sub-regions over one electrical cycle, the study finds that torque improves when rotor and stator teeth approach magnetic saturation in both fully aligned and half-pitch misaligned states. Conversely, saturation in the fully misaligned state is minimized to reduce negative torque. To improve torque, key structural parameters such as rotor-tooth-width ratio, split ratio, and multi-stack rotor configuration are systematically refined via 3-D finite element analysis (FEA). Results show that the proposed topology achieves a 3.5% increase in torque density under saturation conditions and extends the torque–speed range, positioning its performance between conventional stepper and servo motors while conserving magnet volume. An existing benchmark motor is utilized, and experimental tests are performed to validate the analysis.
Förderung
- National Science and Technology Council, Taiwan
Zitieren
APA
Hsieh, M., Huynh, A. T., Le, M. D., & Lee, Y. (2026). Electromagnetic Design of Hybrid Stepper Motors Accounting for Magnetic Saturation Toward Servo-Level Torque Density. IEEE Transactions on Magnetics, 62(10), 8203505-8203505. https://doi.org/10.1109/tmag.2026.3695656
Vancouver
Hsieh M, Huynh AT, Le MD, Lee Y. Electromagnetic Design of Hybrid Stepper Motors Accounting for Magnetic Saturation Toward Servo-Level Torque Density. IEEE Transactions on Magnetics. 2026;62(10):8203505-8203505. doi:10.1109/tmag.2026.3695656
BibTeX
@article{Hsieh2026,
author = {Hsieh, Min-Fu and Huynh, Anh Thanh and Le, Minh-Hoc Duong and Lee, Yu-Xian},
title = {Electromagnetic Design of Hybrid Stepper Motors Accounting for Magnetic Saturation Toward Servo-Level Torque Density},
journal = {IEEE Transactions on Magnetics},
year = {2026},
volume = {62},
number = {10},
pages = {8203505--8203505},
doi = {10.1109/tmag.2026.3695656}
}
EUVIMED