EUVIMEDEUVIMED entdecken
Crossref

Wheel-INS2: Multiple MEMS IMU-Based Dead Reckoning System With Different Configurations for Wheeled Robots

Yibin Wu, Jian Kuang, Xiaoji Niu

IEEE Transactions on Intelligent Transportation Systems · 2023-03 · 24 (3) · 3064-3077

DOI: 10.1109/tits.2022.3220508 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Intelligent Transportation Systems, 2023-03. Verfasst von Yibin Wu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Special Fund of Hubei Luojia Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A reliable self-contained navigation system is essential for autonomous vehicles. Based on our previous study on Wheel-INS [1], a wheel-mounted inertial measurement unit (Wheel-IMU)-based dead reckoning (DR) system, in this paper, we propose a multiple IMUs-based DR solution for the wheeled robots. The IMUs are mounted at different places on the wheeled vehicles to acquire various dynamic information. In particular, at least one IMU has to be mounted at the wheel to measure the wheel velocity and take advantage of the rotation modulation. The system is implemented through a distributed extended Kalman filter structure where each subsystem (corresponding to each IMU) retains and updates its own states separately. The relative position constraints between the multiple IMUs are exploited to further limit the error drift and improve the system’s robustness. Particularly, we present the DR systems using dual Wheel-IMUs, one Wheel-IMU plus one vehicle body-mounted IMU (Body-IMU), and dual Wheel-IMUs plus one Body-IMU as examples for analysis and comparison. Field tests illustrate that the proposed multi-IMU DR system outperforms the single Wheel-INS in terms of both positioning and heading accuracy. By comparing with the centralized filter, the proposed distributed filter shows unimportant accuracy degradation while holding significant computation efficiency. Moreover, among the three multi-IMU configurations, the one Body-IMU plus one Wheel-IMU design obtains the minimum drift rate. The position drift rates of the three configurations are 0.82% (dual Wheel-IMUs), 0.69% (one Body-IMU plus one Wheel-IMU), and 0.73% (dual Wheel-IMUs plus one Body-IMU), respectively.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Special Fund of Hubei Luojia Laboratory

Zitieren

APA

Wu, Y., Kuang, J., & Niu, X. (2023). Wheel-INS2: Multiple MEMS IMU-Based Dead Reckoning System With Different Configurations for Wheeled Robots. IEEE Transactions on Intelligent Transportation Systems, 24(3), 3064-3077. https://doi.org/10.1109/tits.2022.3220508

Vancouver

Wu Y, Kuang J, Niu X. Wheel-INS2: Multiple MEMS IMU-Based Dead Reckoning System With Different Configurations for Wheeled Robots. IEEE Transactions on Intelligent Transportation Systems. 2023;24(3):3064-3077. doi:10.1109/tits.2022.3220508

BibTeX
@article{Wu2023,
  author = {Wu, Yibin and Kuang, Jian and Niu, Xiaoji},
  title = {Wheel-INS2: Multiple MEMS IMU-Based Dead Reckoning System With Different Configurations for Wheeled Robots},
  journal = {IEEE Transactions on Intelligent Transportation Systems},
  year = {2023},
  volume = {24},
  number = {3},
  pages = {3064--3077},
  doi = {10.1109/tits.2022.3220508}
}
Kostenlos starten →