EUVIMEDEUVIMED entdecken
Crossref

A Dual-Path Gyroscope Calibration Framework Combining Residual Bias Optimization and Cross-Axis Coupling Compensation

Jinyue Zhao, Kunpeng He, Le Kang, Sixu Huang

IEEE Transactions on Instrumentation and Measurement · 2026 · 75 · 2515913-2515913

DOI: 10.1109/tim.2026.3714598 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Instrumentation and Measurement, 2026. Verfasst von Jinyue Zhao und 3 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An improved artificial bee colony (IABC) algorithm is proposed for gyroscope bias correction in inertial navigation systems (INSs), and an integrated compensation pipeline is established to further suppress residual cross-axis coupling caused by sensor nonorthogonality. The bias-correction effectiveness is evaluated using a two-round eight-orientation heading test, where the inertial unit is placed at 0°, 45°, 90°, 135°, 180°, 225°, 270°, and 315°, and the signed heading residuals are assessed before and after compensation. Without correction, the standard deviations of the signed heading residuals are 0.0564° and 0.0795° in the two independent trials, respectively. Conventional approaches provide limited and less consistent improvements, whereas the proposed IABC method yields a more compact and repeatable residual distribution, reducing the standard deviations of the signed heading residuals to 0.0259° and 0.0395°, respectively. After bias mitigation, a practical nonorthogonality test-and-compensation strategy is introduced: three single-axis constant-rate rotation experiments are conducted under nominal $X$ -, $Y$ -, and $Z$ -axis excitations, the six independent off-diagonal coupling terms are identified from steady-state cross-axis responses, and a practical cross-axis sensitivity correction (PCSC) matrix is constructed. The estimated PCSC matrix is injected by updating only the off-diagonal entries of the firmware cross-axis configuration while preserving diagonal gains. Using the same data, a different initialization verification protocol, nonexcited-axis leakage is shown to be markedly reduced after compensation across all three rotation cases, demonstrating effective suppression of nonorthogonality-induced coupling.

Zitieren

APA

Zhao, J., He, K., Kang, L., & Huang, S. (2026). A Dual-Path Gyroscope Calibration Framework Combining Residual Bias Optimization and Cross-Axis Coupling Compensation. IEEE Transactions on Instrumentation and Measurement, 75, 2515913-2515913. https://doi.org/10.1109/tim.2026.3714598

Vancouver

Zhao J, He K, Kang L, Huang S. A Dual-Path Gyroscope Calibration Framework Combining Residual Bias Optimization and Cross-Axis Coupling Compensation. IEEE Transactions on Instrumentation and Measurement. 2026;75:2515913-2515913. doi:10.1109/tim.2026.3714598

BibTeX
@article{Zhao2026,
  author = {Zhao, Jinyue and He, Kunpeng and Kang, Le and Huang, Sixu},
  title = {A Dual-Path Gyroscope Calibration Framework Combining Residual Bias Optimization and Cross-Axis Coupling Compensation},
  journal = {IEEE Transactions on Instrumentation and Measurement},
  year = {2026},
  volume = {75},
  pages = {2515913--2515913},
  doi = {10.1109/tim.2026.3714598}
}
Kostenlos starten →