Measurement-Bandwidth Engineering for Shot-Noise-Limited SWIR Hyperspectral Line-Scan Instrumentation
IEEE Transactions on Instrumentation and Measurement · 2026 · 75 · 9530310-9530310
DOI: 10.1109/tim.2026.3712946 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Instrumentation and Measurement, 2026. Verfasst von Dong-Yeon Lee und 2 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Gefördert von: National Research and Development Program through the National Research Foundation of Korea (NRF), Ministry of Science and ICT.
Abstract (Originalsprache)
Short-wave infrared (SWIR) hyperspectral line-scan systems frequently operate in a shot-noise-limited regime because dark current increases significantly at longer wavelengths. In this regime, the signal uncertainty is fundamentally determined by the equivalent noise bandwidth (ENBW) of the acquisition chain rather than by offset calibration alone. Conventional capacitive transimpedance amplifier (CTIA)-based readout schemes implicitly fix the measurement bandwidth through the integration window, causing stochastic current fluctuations to accumulate without spectral control. This article proposes a front-end measurement-bandwidth engineering method that explicitly controls ENBW prior to stochastic charge accumulation. By reshaping the input-current spectrum before integration, the proposed method reduces shot-noise variance without increasing integration capacitance or altering pixel geometry. A $64 \times 1$ SWIR line-scan prototype validates the theoretical ENBW–noise relationship under identical optical and electrical conditions. Experimental results show that the measured shot-noise reduction follows the ENBW scaling introduced by the adaptive front-end network, improving signal-to-noise ratio (SNR) from 68.1 to 73.2 dB under noncooled operation up to ~ $2.6~\mu $ m.
Förderung
- National Research and Development Program through the National Research Foundation of Korea (NRF), Ministry of Science and ICT
Zitieren
APA
Lee, D., Hyeon, J., & Kim, H. (2026). Measurement-Bandwidth Engineering for Shot-Noise-Limited SWIR Hyperspectral Line-Scan Instrumentation. IEEE Transactions on Instrumentation and Measurement, 75, 9530310-9530310. https://doi.org/10.1109/tim.2026.3712946
Vancouver
Lee D, Hyeon J, Kim H. Measurement-Bandwidth Engineering for Shot-Noise-Limited SWIR Hyperspectral Line-Scan Instrumentation. IEEE Transactions on Instrumentation and Measurement. 2026;75:9530310-9530310. doi:10.1109/tim.2026.3712946
BibTeX
@article{Lee2026,
author = {Lee, Dong-Yeon and Hyeon, Jang-Su and Kim, Hyeon-June},
title = {Measurement-Bandwidth Engineering for Shot-Noise-Limited SWIR Hyperspectral Line-Scan Instrumentation},
journal = {IEEE Transactions on Instrumentation and Measurement},
year = {2026},
volume = {75},
pages = {9530310--9530310},
doi = {10.1109/tim.2026.3712946}
}
EUVIMED