EUVIMEDEUVIMED entdecken
Crossref

Optimum Design of Flat Type LVDT Position Sensors With Internal Armature

Mehran Mirzaei, Jiri Maier, Pavel Ripka

IEEE Transactions on Instrumentation and Measurement · 2026 · 75 · 9531215-9531215

DOI: 10.1109/tim.2026.3712936 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Instrumentation and Measurement, 2026. Verfasst von Mehran Mirzaei und 2 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: Grant Agency of the Czech Republic (GACR) Project “Novel Magnetic Position Sensor” in Czech Technical University in Prague.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents the design optimization of flat-type linear variable differential transformer (LVDT) position sensors to extend the linearity range. Rectangular-shaped excitation and pickup coils with a discrete and segmented structure, along with a block-shaped ferrite for the armature, are used. The excitation and pickup coils are optimized for the linearity range extension of LVDT position sensors. The 3-D finite element method (FEM) is utilized for the performance analysis and design optimization of LVDT position sensors. The measured nonlinearity error can be achieved below 1 % for an armature movement range of ±55 mm. The movement range with low nonlinearity error below 1 % can be further increased using a shorter axial length for the armature. A novel double-sensor structure is also investigated with a 9 % higher linearity range without increasing the axial length. The linearity range-to-total axial length of coils ratio is about 73 %, with a nonlinearity error of 1 %. The measured nonlinearity error can also be further decreased to 0.5 % for a ±50 mm movement range.

Förderung

  • Grant Agency of the Czech Republic (GACR) Project “Novel Magnetic Position Sensor” in Czech Technical University in Prague

Zitieren

APA

Mirzaei, M., Maier, J., & Ripka, P. (2026). Optimum Design of Flat Type LVDT Position Sensors With Internal Armature. IEEE Transactions on Instrumentation and Measurement, 75, 9531215-9531215. https://doi.org/10.1109/tim.2026.3712936

Vancouver

Mirzaei M, Maier J, Ripka P. Optimum Design of Flat Type LVDT Position Sensors With Internal Armature. IEEE Transactions on Instrumentation and Measurement. 2026;75:9531215-9531215. doi:10.1109/tim.2026.3712936

BibTeX
@article{Mirzaei2026,
  author = {Mirzaei, Mehran and Maier, Jiri and Ripka, Pavel},
  title = {Optimum Design of Flat Type LVDT Position Sensors With Internal Armature},
  journal = {IEEE Transactions on Instrumentation and Measurement},
  year = {2026},
  volume = {75},
  pages = {9531215--9531215},
  doi = {10.1109/tim.2026.3712936}
}
Kostenlos starten →