Design Guidelines for Selecting Pattern Pitch in Prism-Based Multiaxis Sensors Using the Sampling Moiré Method
IEEE Transactions on Instrumentation and Measurement · 2026 · 75 · 9530711-9530711
DOI: 10.1109/tim.2026.3711300 ↗Kurz gefasst
Leitlinie in der Zeitschrift IEEE Transactions on Instrumentation and Measurement, 2026. Verfasst von Toshihiro Shiratori und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: Grant-in-Aid for JSPS Fellows, Japan Society for the Promotion of Science (JSPS) KAKENHI.
Abstract (Originalsprache)
The sampling moiré (SM) method is a fringe phase analysis technique that enables the measurement of vision-based high-resolution deformation using periodic patterns. Recently, sensors combining the SM method with optical prisms have been developed. Thus, they enable the simultaneous measurement of in-plane and out-of-plane displacement with a single camera. When the SM method is used as the sensing principle, the constraints during analysis and the performance evaluation metrics differ from those of general image analysis applications. Owing to optical path design and mechanical structure constraints, the observable pattern area is limited, thereby restricting the number of pattern periods usable for analysis and the corresponding effective pixels. Furthermore, errors primarily appear as statistical variations since the pattern shifts without deformation. Because this statistical variation directly determines the displacement resolution, the sensing design should be optimized. Therefore, this study presents design guidelines for selecting the pattern pitch to minimize the displacement resolution in prism-based sensors with the SM method. A theoretical model was developed to clarify the factors governing the standard deviation. The relationships among imaging noise, analysis window length, and period mismatch were examined through a numerical simulation. Furthermore, validation experiments generally agreed with the simulations, and the displacement resolution reached a minimum at a sampling pitch of approximately 8–12 pixels. Finally, an out-of-plane displacement measurement using a prism was demonstrated. The displacement resolution was $0.15~\mu $ m, corresponding to 2.3% of the pixel size. These results provide practical design guidelines for pattern-pitch selection in prism-based multiaxis sensors.
Förderung
- Grant-in-Aid for JSPS Fellows
- Japan Society for the Promotion of Science (JSPS) KAKENHI
Zitieren
APA
Shiratori, T., Sato, S., Okamoto, Y., Takei, Y., & Takahashi, H. (2026). Design Guidelines for Selecting Pattern Pitch in Prism-Based Multiaxis Sensors Using the Sampling Moiré Method. IEEE Transactions on Instrumentation and Measurement, 75, 9530711-9530711. https://doi.org/10.1109/tim.2026.3711300
Vancouver
Shiratori T, Sato S, Okamoto Y, Takei Y, Takahashi H. Design Guidelines for Selecting Pattern Pitch in Prism-Based Multiaxis Sensors Using the Sampling Moiré Method. IEEE Transactions on Instrumentation and Measurement. 2026;75:9530711-9530711. doi:10.1109/tim.2026.3711300
BibTeX
@article{Shiratori2026,
author = {Shiratori, Toshihiro and Sato, Soya and Okamoto, Yuki and Takei, Yusuke and Takahashi, Hidetoshi},
title = {Design Guidelines for Selecting Pattern Pitch in Prism-Based Multiaxis Sensors Using the Sampling Moiré Method},
journal = {IEEE Transactions on Instrumentation and Measurement},
year = {2026},
volume = {75},
pages = {9530711--9530711},
doi = {10.1109/tim.2026.3711300}
}
EUVIMED