EUVIMEDEUVIMED entdecken
Crossref

An Aeromagnetic Compensation Model for Vibration-Induced Magnetic Interference Without Additional Sensors

Changping Du, Haidong Wang, Hong Guo

IEEE Transactions on Instrumentation and Measurement · 2026 · 75 · 6508910-6508910

DOI: 10.1109/tim.2026.3693450 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Instrumentation and Measurement, 2026. Verfasst von Changping Du und 2 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aeromagnetic compensation is a critical process in airborne magnetic anomaly detection (MAD), aimed at reducing magnetic interference to improve the detection signal-to-noise ratio (SNR). In practice, detection magnetometers are typically mounted at the end of an external boom to minimize interference from the aircraft. However, the nonrigid connection between the boom and fuselage inevitably induces relative vibration, which introduces both geomagnetic gradient interference and aircraft magnetic gradient interference. To address this issue, this article proposes a compensation method for vibration-induced magnetic interference using only a fluxgate magnetometer and an attitude sensor. A set of nonlinear equations is first established through direction cosine matrices, which link the attitude sensor readings, the relative vibration angles between the boom and fuselage, and the fluxgate magnetometer measurements. The Levenberg–Marquardt (L–M) optimization algorithm is then employed to solve for the relative vibration angles. Subsequently, a vibration-induced magnetic interference compensation model is constructed by integrating the estimated angles and boom length with the aircraft magnetic gradient model and the geomagnetic gradient model. Finally, combined with the traditional Tolles–Lawson (T–L) model, an integrated aeromagnetic compensation model is constructed, which can more effectively reduce platform-generated magnetic interference. Field experiments demonstrate that this method suppressed the vibration-induced interference to improve the compensation accuracy. Compared with the T–L model, the compensation model proposed in this article achieves an increase of 3 to 4 in the improvement ratio (IR) of the standard deviation (STD) of the compensated data and an equivalent increase of 3 to 4 in the IR of the figure of merit (FOM).

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Du, C., Wang, H., & Guo, H. (2026). An Aeromagnetic Compensation Model for Vibration-Induced Magnetic Interference Without Additional Sensors. IEEE Transactions on Instrumentation and Measurement, 75, 6508910-6508910. https://doi.org/10.1109/tim.2026.3693450

Vancouver

Du C, Wang H, Guo H. An Aeromagnetic Compensation Model for Vibration-Induced Magnetic Interference Without Additional Sensors. IEEE Transactions on Instrumentation and Measurement. 2026;75:6508910-6508910. doi:10.1109/tim.2026.3693450

BibTeX
@article{Du2026,
  author = {Du, Changping and Wang, Haidong and Guo, Hong},
  title = {An Aeromagnetic Compensation Model for Vibration-Induced Magnetic Interference Without Additional Sensors},
  journal = {IEEE Transactions on Instrumentation and Measurement},
  year = {2026},
  volume = {75},
  pages = {6508910--6508910},
  doi = {10.1109/tim.2026.3693450}
}
Kostenlos starten →