Model-Based Indirect Load Measurement for Aircraft Landing Gear Using FBG Sensors and Dynamic Graph Networks
IEEE Transactions on Instrumentation and Measurement · 2026 · 75 · 2511017-2511017
DOI: 10.1109/tim.2026.3693431 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Instrumentation and Measurement, 2026. Verfasst von Xinda Yang und 6 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Young Backbone Teacher Support Plan of Beijing Information Science and Technology University.
Abstract (Originalsprache)
Accurate measurement and quantitative evaluation of aircraft landing gear loads are essential for ensuring structural integrity and flight safety. Since no dedicated sensor can directly measure landing gear loads, the assessment must rely on indirect estimation from strain responses obtained by strain sensors. However, most conventional and learning-based approaches fail to model the spatial topology of measurement points or to account for variations caused by different buffer-stroke conditions, resulting in calibration inconsistency and reduced measurement precision. To address these limitations, we propose a model-based indirect load-measurement method that employs a dynamic graph network (DGN) to estimate loads from distributed strain data. By integrating channel-wise self-attention (CSA) with dynamic graph convolution (DGCN), the model captures both local and global dependencies in the strain-load relationship, thereby enhancing robustness across varying buffer strokes. Ground load calibration tests were performed on a full-scale aircraft right landing gear, where fiber Bragg grating (FBG) sensors measured strain responses associated with longitudinal ( $X$ ), vertical ( $Y$ ), and lateral ( $Z$ ) load components under three representative buffer-stroke settings. Using $K$ -fold cross-validation ( $K\mathbf~{=14}$ ), the proposed approach achieved high-accuracy load estimation with mean absolute percentage errors (MAPEs) of ( $\mathbf {4.125{\,}\pm {\,}1.743}$ )%, ( $\mathbf {1.347{\,}\pm {\,}0.421}$ )%, and ( $\mathbf {4.196{\,}\pm {\,}1.419}$ )% in the $X$ -, $Y$ -, and $Z$ -directions, respectively. Furthermore, the overall measurement uncertainty of our built indirect load-measurement system was experimentally determined to be $\mathbf {2.5}$ %, which indicates a compact overall uncertainty level for the proposed indirect measurement system and reflects the stable performance of the method. Source code is available at https://github.com/Mu-Tang/CSA-DGCN
Förderung
- National Natural Science Foundation of China
- Young Backbone Teacher Support Plan of Beijing Information Science and Technology University
Zitieren
APA
Yang, X., Du, H., Zhu, L., Deng, C., Zhao, J., Guo, Z., & Yu, M. (2026). Model-Based Indirect Load Measurement for Aircraft Landing Gear Using FBG Sensors and Dynamic Graph Networks. IEEE Transactions on Instrumentation and Measurement, 75, 2511017-2511017. https://doi.org/10.1109/tim.2026.3693431
Vancouver
Yang X, Du H, Zhu L, Deng C, Zhao J, Guo Z, et al. Model-Based Indirect Load Measurement for Aircraft Landing Gear Using FBG Sensors and Dynamic Graph Networks. IEEE Transactions on Instrumentation and Measurement. 2026;75:2511017-2511017. doi:10.1109/tim.2026.3693431
BibTeX
@article{Yang2026,
author = {Yang, Xinda and Du, Hang and Zhu, Lianqing and Deng, Chaofan and Zhao, Junchi and Guo, Zhiqiang and Yu, Mingxin},
title = {Model-Based Indirect Load Measurement for Aircraft Landing Gear Using FBG Sensors and Dynamic Graph Networks},
journal = {IEEE Transactions on Instrumentation and Measurement},
year = {2026},
volume = {75},
pages = {2511017--2511017},
doi = {10.1109/tim.2026.3693431}
}
EUVIMED