EUVIMEDEUVIMED entdecken
Crossref

An In Situ Laser-Assisted Micro/Nano Scratch Tester for Characterizing the Deformation Behaviors of Materials at High Temperature

Chunxue Yi, Haoxiang Wu, Yongfeng Qian, Puhong Xu, Xingyu Fan, Hu Huang, Hongwei Zhao

IEEE Transactions on Instrumentation and Measurement · 2026 · 75 · 1-15

DOI: 10.1109/tim.2026.3687292 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Instrumentation and Measurement, 2026. Verfasst von Chunxue Yi und 6 weiteren Autor:innen. Gefördert von: National Natural Science Foundation of China, Graduate Innovation Fund of Jilin University, Doctoral Student Research and Innovation Ability Enhancement Project of Department of Education of Jilin Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser-assisted machining technology is widely used in the field of ultra-precision manufacturing. However, the microscale deformation mechanisms of materials under the action of mechanical-thermal coupling remain unclear, and there is a lack of specialized tester to carry out laser-assisted scratch tests with the quantitative normal force. To this end, an in situ laser-assisted micro/nano scratch tester was developed here, featuring a normal force control uncertainty of 1.6%, and the control logic based on optical-mechanical coupling was planned. The in situ laser heating strategy maximized the upper temperature limit of the scratch region. Considering the power attenuation of the laser as it passed through the indenter, the temperature field of in situ laser heating on Zr-based metallic glass (MG) was modeled. In addition, a multipoint temperature synchronous acquisition method based on the thermocouple array was proposed, which accurately measured the spatial and temporal distribution characteristics of the temperature field and realized the calibration of the temperature field model with an uncertainty of 0.6%. Utilizing the developed tester, the scratch-induced deformation behaviors of Zr-based MG at high temperature were investigated. As the laser power increased from 0 to 10.5 W, the temperature of Zr-based MG entered the supercooled liquid phase region. The average depth of residual scratch grooves increased from 0.45 to $5.56~\mu $ m, the average width expanded from 4.92 to $72.11~\mu $ m, and the average coefficient of friction (COF) rose from 0.194 to 0.412. Correspondingly, the dominant scratch-induced deformation mechanism evolved from plowing to cutting. This study provides an instrument to investigate the microscale deformation behaviors and removal mechanisms of materials in laser-assisted machining.

Förderung

  • National Natural Science Foundation of China
  • Graduate Innovation Fund of Jilin University
  • Doctoral Student Research and Innovation Ability Enhancement Project of Department of Education of Jilin Province
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Yi, C., Wu, H., Qian, Y., Xu, P., Fan, X., Huang, H., & Zhao, H. (2026). An In Situ Laser-Assisted Micro/Nano Scratch Tester for Characterizing the Deformation Behaviors of Materials at High Temperature. IEEE Transactions on Instrumentation and Measurement, 75, 1-15. https://doi.org/10.1109/tim.2026.3687292

Vancouver

Yi C, Wu H, Qian Y, Xu P, Fan X, Huang H, et al. An In Situ Laser-Assisted Micro/Nano Scratch Tester for Characterizing the Deformation Behaviors of Materials at High Temperature. IEEE Transactions on Instrumentation and Measurement. 2026;75:1-15. doi:10.1109/tim.2026.3687292

BibTeX
@article{Yi2026,
  author = {Yi, Chunxue and Wu, Haoxiang and Qian, Yongfeng and Xu, Puhong and Fan, Xingyu and Huang, Hu and Zhao, Hongwei},
  title = {An In Situ Laser-Assisted Micro/Nano Scratch Tester for Characterizing the Deformation Behaviors of Materials at High Temperature},
  journal = {IEEE Transactions on Instrumentation and Measurement},
  year = {2026},
  volume = {75},
  pages = {1--15},
  doi = {10.1109/tim.2026.3687292}
}
Kostenlos starten →