EUVIMEDEUVIMED entdecken
Crossref

Quantitative Identification of Corrosion Degree in Plate-Like Structures Based on Multifeature Fusion and Sensor Path Optimization

Hong Zhang, Juntao Wei, Lingyu Sun, Feiyu Teng, Lei Zhang, Qingmei Sui, Mingshun Jiang

IEEE Transactions on Instrumentation and Measurement · 2026 · 75 · 1-13

DOI: 10.1109/tim.2026.3679173 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Instrumentation and Measurement, 2026. Verfasst von Hong Zhang und 6 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Gefördert von: National Key Research and Development Project, National Natural Science Foundation of China, Natural Science Foundation of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pitting corrosion on the surface of an aluminum alloy plate will reduce its structural strength and affect structural safety. In this article, a quantitative identification method of corrosion degree based on the combination of multiple damage characteristics and sensor path optimization is proposed. First, finite element (FE) analysis is used to simulate the effect of different degrees of corrosion on Lamb waves. Nine parameters were analyzed for their correlation with corrosion degree, from which three damage indices (DIs) based on the amplitude and energy of the scattered signals were ultimately selected. Correlation functions between three DIs and corrosion degree were then established for quantitative identification. In addition, the influence of the number of paths on the results was studied, and the optimal number of paths for identification was determined. Multiple simulation experiments were conducted involving different corrosion locations and degrees, resulting in the mean absolute error (MAE) of less than 46 mm3. Finally, an experimental system was built to conduct corrosion identification experiments, achieving an MAE of less than 50 mm3, closely matching the simulation results. These research findings demonstrate that the correlation functions derived from simulation exhibit good accuracy and stability in the detection of corrosion with regular shapes.

Förderung

  • National Key Research and Development Project
  • National Natural Science Foundation of China
  • Natural Science Foundation of Shandong Province

Zitieren

APA

Zhang, H., Wei, J., Sun, L., Teng, F., Zhang, L., Sui, Q., & Jiang, M. (2026). Quantitative Identification of Corrosion Degree in Plate-Like Structures Based on Multifeature Fusion and Sensor Path Optimization. IEEE Transactions on Instrumentation and Measurement, 75, 1-13. https://doi.org/10.1109/tim.2026.3679173

Vancouver

Zhang H, Wei J, Sun L, Teng F, Zhang L, Sui Q, et al. Quantitative Identification of Corrosion Degree in Plate-Like Structures Based on Multifeature Fusion and Sensor Path Optimization. IEEE Transactions on Instrumentation and Measurement. 2026;75:1-13. doi:10.1109/tim.2026.3679173

BibTeX
@article{Zhang2026,
  author = {Zhang, Hong and Wei, Juntao and Sun, Lingyu and Teng, Feiyu and Zhang, Lei and Sui, Qingmei and Jiang, Mingshun},
  title = {Quantitative Identification of Corrosion Degree in Plate-Like Structures Based on Multifeature Fusion and Sensor Path Optimization},
  journal = {IEEE Transactions on Instrumentation and Measurement},
  year = {2026},
  volume = {75},
  pages = {1--13},
  doi = {10.1109/tim.2026.3679173}
}
Kostenlos starten →