EUVIMEDEUVIMED entdecken
Crossref

Junction Temperature-Based Adaptive Short Circuit Detection Technique for SiC MOSFETs

Aditya Aman, Abhishek Chanekar, Sandeep Anand, Abhinav Arya, Anant K. Agarwal

IEEE Transactions on Industrial Electronics · 2026-09 · 73 (9) · 13814-13825

DOI: 10.1109/tie.2026.3672851 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Industrial Electronics, 2026-09. Verfasst von Aditya Aman und 4 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Gefördert von: Indian Institute of Technology Bombay, Department of Science and Technology, The IIT Bombay-Ohio State Frontier Science and Engineering Research Centre.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicon carbide (SiC) MOSFETs have a low short-circuit (SC) withstand capacity. Hence, an SC detection circuit with a low SC detection time ( $t_{SCD}$ ) and high robustness is required to achieve an effective SC protection for SiC MOSFETs. To achieve both the objectives simultaneously, mostly two-stage SC detection techniques are suggested in the literature. The primary stage in these techniques is designed to have a very low $t_{SCD}$ . However, a few of the suggested primary stage are known to have a low robustness while the others are known to be incapable of detecting a fault under load (FUL) SC condition. To improve the overall robustness and to identify FUL, a desaturation (DESAT)-based SC detection technique is usually used as a secondary stage. In a DESAT-based technique, the reference voltage ( $V_\text{REF}$ ) for SC detection is kept based on the power device output characteristic and its worst-case operating junction temperature ( $T_{J}$ ). However, this leads to a suboptimal $t_{SCD}$ as the device may not be operating at its worst-case $T_{J}$ preceeding an SC event. Thereby, this may adversely affect the SC protection effectiveness by making the secondary stage slower. To address the aforementioned challenge, this manuscript proposes a novel technique to adaptively vary ${V}_{REF}$ based on the feedback of $T_{J}$ to achieve an optimal $t_{SCD}$ . Further, the mathematical formulation for the rate at which $V_{REF}$ should be varied and operational constraints necessary to mitigate a misdetection during normal operation are also determined. Experimental investigation of the proposed technique is carried out by conducting SC at 800 V on a 1.2 kV rated SiC MOSFET. Results show up to 24.3 $\%$ reduction in $t_{SCD}$ compared with the existing secondary protection technique.

Förderung

  • Indian Institute of Technology Bombay
  • Department of Science and Technology
  • The IIT Bombay-Ohio State Frontier Science and Engineering Research Centre
  • Prime Minister’s Research Fellowship (PMRF) Scheme

Zitieren

APA

Aman, A., Chanekar, A., Anand, S., Arya, A., & Agarwal, A. K. (2026). Junction Temperature-Based Adaptive Short Circuit Detection Technique for SiC MOSFETs. IEEE Transactions on Industrial Electronics, 73(9), 13814-13825. https://doi.org/10.1109/tie.2026.3672851

Vancouver

Aman A, Chanekar A, Anand S, Arya A, Agarwal AK. Junction Temperature-Based Adaptive Short Circuit Detection Technique for SiC MOSFETs. IEEE Transactions on Industrial Electronics. 2026;73(9):13814-13825. doi:10.1109/tie.2026.3672851

BibTeX
@article{Aman2026,
  author = {Aman, Aditya and Chanekar, Abhishek and Anand, Sandeep and Arya, Abhinav and Agarwal, Anant K.},
  title = {Junction Temperature-Based Adaptive Short Circuit Detection Technique for SiC MOSFETs},
  journal = {IEEE Transactions on Industrial Electronics},
  year = {2026},
  volume = {73},
  number = {9},
  pages = {13814--13825},
  doi = {10.1109/tie.2026.3672851}
}
Kostenlos starten →