Systematic Design Method for Unbalance Force Rejection Control Parameters for Magnetic Rotor-Bearing Systems
IEEE Transactions on Industrial Electronics · 2026-05 · 73 (5) · 7890-7901
DOI: 10.1109/tie.2025.3647909 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Industrial Electronics, 2026-05. Verfasst von Shuo-Chih Wei und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 22 Literaturangaben. Gefördert von: Advanced Institute of Manufacturing with High-Tech Innovations, Ministry of Education (MOE) in Taiwan, MOE Industry-Academia Cooperative Ph.D. Program.
Abstract (Originalsprache)
Unbalance-induced vibrations remain a critical challenge in high-speed rotor systems supported by active magnetic bearings (AMBs). This study presents an optimization-based procedure to systematically design the parameters of an unbalance force rejection controller (UFRC). The UFRC is capable of suppressing synchronous currents caused by rotor mass unbalance and resonance, thereby improving energy efficiency and reducing vibration-induced noise. The proposed method requires only five inputs: the system’s sensitivity function, resonant frequencies, minimum and maximum operating speeds, and the allowable peak sensitivity. The proposed method is optimization-based, ensuring that the designed parameters are optimal with respect to the objectives and constraints. Furthermore, the method is nonparametric, it does not require a full system model and system parameters, making it highly suitable for industrial applications. The optimized UFRC parameters were experimentally validated on the shaft of a magnetically levitated chiller system. Experimental results show that, after activating the UFRC, the magnitude of the control current was reduced by 75% compared with the case without compensation and approached the same level as static levitation. Meanwhile, the vibration reduced by more than 50%, showing the effectiveness of the optimized parameters.
Förderung
- Advanced Institute of Manufacturing with High-Tech Innovations
- Ministry of Education (MOE) in Taiwan
- MOE Industry-Academia Cooperative Ph.D. Program
Zitieren
APA
Wei, S., & Chen, S. (2026). Systematic Design Method for Unbalance Force Rejection Control Parameters for Magnetic Rotor-Bearing Systems. IEEE Transactions on Industrial Electronics, 73(5), 7890-7901. https://doi.org/10.1109/tie.2025.3647909
Vancouver
Wei S, Chen S. Systematic Design Method for Unbalance Force Rejection Control Parameters for Magnetic Rotor-Bearing Systems. IEEE Transactions on Industrial Electronics. 2026;73(5):7890-7901. doi:10.1109/tie.2025.3647909
BibTeX
@article{Wei2026,
author = {Wei, Shuo-Chih and Chen, Shyh-Leh},
title = {Systematic Design Method for Unbalance Force Rejection Control Parameters for Magnetic Rotor-Bearing Systems},
journal = {IEEE Transactions on Industrial Electronics},
year = {2026},
volume = {73},
number = {5},
pages = {7890--7901},
doi = {10.1109/tie.2025.3647909}
}
EUVIMED